Advertisement
9. MAINTENANCE
Very little maintenance is required to keep your converter operating properly.
You should clean the exterior of the unit periodically with a damp cloth to
prevent accumulation of dust and dirt. At the same time, tighten the screws on
the DC input and DC output terminals.
10. NOTE
All specifications typical at nominal line, half load, and 25℃ unless otherwise
noted.
Specifications subject to change without notice.
WARNING: DO NOT DISASSEMBLE THE UNIT. HAZARDOUS VOLTAGE!
DANGER!
PLEASE RETURN TO THE DEALER IF YOU FIND ANY PROBLEM WITH
THE UNIT.
11. SUITABLE POWER SOURCE
In order to operate the converter and supply power to an appliance, a suitable
24V DC power supply is required. This can be a vehicle or caravan battery,
portable power pack or an independent 24V lead acid battery, For most
applications, a deep cycle battery is recommended for best performance..
The size of the battery used will determine how long the converter will supply
power to an appliance and how well the converter will perform. Most batteries
are marked with their size in Amp hours (AH) or Cold Cranking Amps.
Because converter are capable of drawing high currents, the converter should
only be connected to a suitable size battery, Connection to an undersized
battery could damage the battery and will result in the converter shutting down
within a short period due to low battery voltage.
The amount of power dawn from the battery is proportional to the converter
load.
5
Advertisement
