Download Print this page

paco PV2412-6 Instruction Manual page 5

Converts 24 volt dc into 12 volt dc power dc to dc converter switchmode

Advertisement

6. ADDING EXTENSION CORD
We recommend that the buyer refrain from using an extension cord between the
DC power source and the converter's DC input. Connecting an extension cord to
the DC input will create a voltage drop, entailing reduced efficiency and output.
7. VENTILATION
IMPORTANT! During operation, make sure the fan keeps revolving. Check the
possible malfunctions if the fan does not work when this unit is
being used. Make sure the fan is not blocked in order to avoid poor ventilation.
8. CAUTION
In case of trouble with the DC output, e.g.short-circuit, overload, etc... the
protection circuit will automatically cut off the output.
In such cases:
(A) switch off the power at once
(B) disconnect all units
(C) check the connected devices
(D) use the units again unless the problems
concerning the connected devices have been solved
When in use for a prolonged period of time, the DC output may suddenly be cut
off although the battery voltage is still very strong. This may be caused by
excessive temperatures.
If this happens. Please proceed as follows:
(A) Switch off the converter at once
(B) Disconnect some of the appliances or wait until the converter cools off
(C) Switch the inverter back on
Always keep the converter in an environment which is:
(A) Well-ventilated
(B) Not exposed to direct sunlight or any other heat source
(C) Inaccessible to children
(D) Safe from water/moisture, oil or grease
(E) Safe from any flammable substance
4

Advertisement

loading

This manual is also suitable for:

Pv2412-10Pv2412-20Pv2412-30Pv2412-40