Table of Contents
Advertisement
Always keep the converter in an environment which is:
(A)Well-ventilated
(B)Not exposed to direct sunlight or any other heat source
(C)Inaccessible to children
(D)Safe from water/moisture, oil or grease
(E)Safe from any flammable substance
9. MAINTENANCE
Very little maintenance is required to keep your converter operating properly.
You should clean the exterior of the unit periodically with a damp cloth to
prevent accumulation of dust and dirt. At the same time, tighten the screws
on the DC input and DC output terminals.
10. NOTE
All specifications are typical at nominal line, half load, and 25℃ unless
otherwise noted. Specifications are subject to change without notice.
WARNING:
DO NOT DISASSEMBLE THE UNIT. HAZARDOUS VOLTAGE! DANGER!
PLEASE RETURN TO THE DEALER IF YOU FIND ANY PROBLEM WITH
THE UNIT.
11. SUITABLE POWER SOURCE
In order to operate the converter and supply power to an appliance, a
suitable 24V DC power supply is required. This can be a vehicle or caravan
battery, portable power pack or an independent 24V lead acid battery,
For most applications, a deep cycle battery is recommended for best
performance..
The size of the battery used will determine how long the converter will
supply power to an appliance and how well the converter will perform.
Most batteries are marked with their size in Amp hours (AH) or Cold
Cranking Amps.
Because converter are capable of drawing high current, the converter
should only be connected to a suitable size battery. Connection to an
undersized battery could damage the battery and will result in the
converter shutting down within a short period due to low battery voltage.
The amount of power dawn from the battery is proportional to the converter
load.
6
Advertisement
Table of Contents
