Table of Contents
Advertisement
M A L L I N C A M S K Y
D S 1 6 C T E C
U S E R
M A N U A L
Now connect the 12V AC adapter to a power source and attach the other end to the camera.
Attach the 5 metre USB 3.0 cable from the back of the to the SkyRaider DS16CTEC to a free
USB 3.0 (or USB 2.0) port on your computer.
The SkyRaider DS16CTEC has some strict power and thru-put requirements, and not all
computers are created equal. If you find you are having difficulties with the following steps, it
maybe the USB 3.0 port on your computer. If that is the case, one option to try is: connected a
Powered USB 3.0 Hub to your USB 3.0 port on your computer. This simple step can improve,
both thru-put, power and distance between your computer and the SkyRaider DS16CTEC
camera.
Power on the DS16C
The first time the DS16C camera is powered on and
connected to the computer, Windows will finish installing
its drivers will recognize the camera. You will hear and a
beep should be heard acknowledging the connection.
Using the USB 2.0 Ports on the SkyRaider DS16CTEC
The USB 2.0 HUB on the SkyRaider-DS16CTEC can be used to connect with various
accessories, such as a guide camera, filter wheel, or electronic focuser. This will allow you
better management of your cables. The integrated USB 2.0 hub on the SkyRaider-DS16CTEC is
powered by the 12V external power source.
16
Advertisement
Table of Contents
