Start Guide; Charge The Battery - Xiaomi FunSnap Capture Instruction Manual

3、入门指南

Start Guide

（1）为电池充电

Charge the Battery

a. 将 USB 线的 Mini-USB 端插入稳定器的 USB 端口里面，另
一 USB 端口连接电源适配器。（适配器需要自备）
Plug the charging cable into gimbal charing port, then
connect the cable with power adaptor. ( Power adptor is
not included)
b. 充电过程中，稳定器手柄后侧的指示灯慢闪，充满后指示灯
常亮，充电大概需要 2 小时。
During the charging, the indicator behind the holder
blinks. If the battery is full charged, the indicator is solid
light. The charging time is about 2 hours.