Calibration On Lnitialization Of The Gimbal - Xiaomi FunSnap Capture Instruction Manual

5、云台初始化校准

Calibration on lnitialization of the Gimbal

当云台出现如下情况时需要进行水平角度校准，可通过云台初
始化和摇杆调整横滚角度。
If the following scenarios happened adjustment can be
made throughinitalization and adjusting the balance bar.
（1）在启动后俯仰角与水平线有小角度偏差。
After start up there is a small difference of the pitch
angle from the balanced angle
（2）横滚角与水平线有小角度偏差。
There is a small difference of roll angle from the
balancedangle
（3）锁定模式下，航向角出现漂移。
There is drift in the yaw direction in yaw lock mode
校准步骤：
Steps for Calibration
云台开机后，连续按键 7 次电源开关，将产品竖直放在水平桌
面上，等待 10 秒钟，待发出"嘀"的一声后，校准完成。
After the gimbal is turned on, press power button 7
times, and then put the product standing on horizontal
surface. Waiting for 10 seconds, the calibration will
success after one beep.
6、保修范围
The warranty
电机及主板 : 6 个月
Motor And Motherboard : 6 months；
电池：3 个月
Battery : 3 months；
USB 数据线及配重块：不保修。
Charging Cable And Counterweight : No warranty.