Target Cable Assemblies - Motorola M68EML08GZ16 User Manual

1.6 Target Cable Assemblies

Table 1-2 M68EML08GZ16 Target Cable and Head Assemblies
MCU Package
32-pin QFP
48-pin QFP
User's Manual
MOTOROLA
To connect your EML08GZ16 to a target system, you need the included target
cable and adapters. See Figure 1-2.
The cable assembly for a 48-pin QFP package consists of: a flex cable, a target
head adapter, a socket-saver and a 48-pin QFP surface mount adapter. The
cable assembly for a 32-pin QFP package consists of: a flex cable, a target
head adapter, a socket-saver and a 32-pin QFP surface mount adapter. One end
of the target cable plugs onto EML08GZ16 connectors J2 and J3. The other
end of the flex cable plugs onto the target head adapter, which plugs onto the
QFP surface mount adapter. You should solder the QFP surface mount adapter
directly onto the target-system board in place of the MCU. The socket-saver
goes between the target head adapter and surface mount adapter. If you use it,
it will reduce wear on the target head adapter. After many insertions, you can
replace the socket-saver without replacing the entire target head adapter.
Table 1-2 lists target cable and head part numbers appropriate for the
EML08GZ16.
Flex Cable Target Head Adapter
Part Number Part Number
M68CBL05C M68TC08GZFJ32
M68CBL05C M68TC08GZFA48
Surface Mount Adapter
M68TQP032SA1
M68TQP048SD1
M68EML08GZ16 Emulation Module - Version 4.0
General Information
Target Cable Assemblies
Part Number
M68TQS032SAG1
M68TQS048SDG1
General Information
Socket-Saver
Part Number
17