Trouble Shooting; Repairs; Hints To The Type Plate - probst VTK-V Operating Instructions Manual

Maintenance and care
6.2

Trouble shooting

ERROR
The clamping force is insufficient, the
load is slipping out
(optional)
(optional)
Adjustment of the gripping range
(optional)
Property of material
6.3

Repairs

Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
6.4

Hints to the type plate

•
Type, serial-number and production year are very important for the identification of your device. If you
need information to spare-parts, warranty or other specific details please refer to this information´s.
•
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled
with the device. Do not exceed this carrying capacity/working load limit (WLL).
•
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck,
excavator) consider the deadweight of the device.
Example:
51100015
CAUSE
The grippers are worn
The maximum load is exceeded
The actual opening width is not correct
The surface of the material is dirty or
the material is not suitable / allowed for
this device
16 / 17
REPAIR
Replace the grippers
Reduce the weight of the load
Adjust the gripping range according to
the load you want to transport
Check the surface of the material or ask
the manufacturer, if the material is
allowed for this device
GB