Samsung NE63 895 S Series User Manual page 25

Induction power boost control
NOTE
• If you turn the control knob to "9/Boost" from another power level, the
Induction cooking zone will operate at power level " ". (You cannot set
Boost " ", if you rotate the knob to the left.)
• In certain circumstances, the Power boost function may be deactivated
automatically to protect the internal electronic components of the
induction element.
To use the Power boost setting, turn the
1.
control knob directly to the "9/Boost"
setting.
2. The digital display will show " ".
• The power boost function makes
additional power available to the
induction cooking zone when you
need it.
Example: To bring a large volume
of water to a boil.
• The power boost function is
activated for a maximum of 10
minutes for each cooking zone.
After Power Boost is finished, the
cooking zones automatically return
to power level " ".
Induction simmer control
Virtual Flame technology
TM
• If the Virtual Flame TM option is set to On, virtual flames appear when you turn
an induction control knob to an On position.
• The virtual flame may look different depending on the appearance, size, or
position of the cookware. (For the best results, use cookware that matches the
element size. Cookware that is too large can cover the virtual flame. Cookware
that is too small can cause the virtual flame to be ill-formed.)
• Impurities on the cookware bottom or the cooktop surface can cause the
virtual flame to be ill-formed or incomplete. Clean up the cookware or the
cooktop surface before using them.
• To turn off the virtual flames, set the Virtual Flame
virtual flame function does not operate, check if the Virtual Flame
been turned off. (See the "System settings" on page 53.)
To use the Simmer setting, turn the
1.
control knob to 1.
2. The digital display will show " ".
• Use Simmer to simmer and keep
large quantities of foods such as
stews and soup warm.
• The simmer setting of the small
cooking zone is ideal for delicate
foods and melting chocolate.
Virtual Flame technology creates the
TM
appearance of flames when you turn on an
induction element.
option to Off. If the
TM
TM option has
English 25