Defrosting Of The Freezer - Scandomestic WKF158W User Manual

Table of Contents

Advertisement

Available languages

Available languages

Clean drain hole
To avoid defrost water overflowing into
the fridge, periodically clean the drain
hole at the back of the fridge compart-
ment. Use a cleaner to clean the hole.

Defrosting of the freezer

The freezer compartment, however, will be-
come progressively covered with frost. This
should be removed.
Never use sharp metal tools to scrape off
frost from the evaporator as you could dam-
age it.
However, when the ice becomes very thick
on the inner liner, complete defrosting
should be carried out as follows:
Pull out the plug from the socket;
Remove all stored food, wrap it in sev-
eral layers of newspaper and put it in a
cool place;
Keep the door open, and placing a basin
underneath of the appliance to collect
the defrost water; when defrosting is
completed, dry the interior thoroughly
Replace the plug in the power socket to
run the appliance again.
Replace the lamp
Lamp type: LED-light. Energy efficiency level:
N/A
Light source in this product is replaceable
only by a professional.
Caution! Before replacing the lamp, discon-
nect the appliance from the mains power
supply.
Lamp specifications are listed on the rating la-
bel.
Follow the below process to replace lamp:
1.
Set the temperature regulator knop at
number "o" to switch off the appliance.
2.
Unplug the appliance to make sure the
appliance is disconnected from the main
power supply.
3.
Remove the screw of the lamp cover
4.
Pull out the lamp cover.
5.
Unscrew the light bulb.
6.
Fit new light bulb according to the oppo-
site direction, then place the lamp cover
and screw.
7.
Plug in the appliance and regulate the
knop to right the position.

Advertisement

Table of Contents
loading

Table of Contents