Quick Start Guide - TiGHT AV DSP-AEC-1010-DA User Manual

Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB
Appendix B: Module Parameters .......................................................................................................... 33
Appendix C, Command Structure Examples .......................................................................................... 39
V1 examples ...................................................................................................................................... 39
SET examples ................................................................................................................................. 39
GET examples ................................................................................................................................ 40
PRESET example ............................................................................................................................ 41
V2 examples ...................................................................................................................................... 42
SET example: ................................................................................................................................. 42
GET example: ................................................................................................................................. 42
RS232 to UDP example: ................................................................................................................. 43
Customer Service ................................................................................................................................... 44

Quick Start Guide

1. Install the TiGHT DSP software found on the product page at
2. Connect the PC running the software directly to the DSP via network cable, or connect to the
same network.
3. Open software and click "Device List" in the top right corner and connect to the DSP.
4. Make sure your computer and TiGHT DSP are connected on the same network.
5. Click on "Connect", it will change to "Disconnect" when your device is online.
You"re all set, enjoy your TiGHTAV product!
www.TiGHTAV.com
3