Table of Contents
Summary of Contents for Joslyn TransEnd 50
- Page 1 Installation, Operation and Maintenance Manual PN 750-0064-REV. 44 TransEnd ™ Surge Suppression Filter Systems TransEnd 100 TransEnd 80 TransEnd 50 TransEnd 25 ® ™ JOSLYN TRANSEND INSTALLATION, OPERATION AND MAINTENANCE MANUAL ISSUED 6.01 ®...
-
Page 2: Installation Assistance
Patent Notice The Joslyn TransEnd is protected by patents which may be issued after the publication of this document, as well as by one or more of the following patents: 5,023,746; 4,835,650; 4,675,538; 4,675,772; 5,191,502; 4,860,502; 4,127,888; 5,146,357; 4,794,490; 5,257,157. Current Technology, Inc. -
Page 3: Pre-Installation Checklist
This manual is designed to step you through the easy installa- tion procedures. However, should you have questions about installing TransEnd, please call Joslyn Technical Support at 800.238.5000. W A R N I N G ! WARNING! The TransEnd’s Warranty is voided if the unit is dam- aged as a result of improper installation or the installer’s failure... - Page 4 W A R N I N G ! WARNING! Discontinue installation if (1) your conditions are inconsistent with the guidelines above or (2) your conditions cannot be verified. Call Joslyn Technical Support at 800.238.5000, if you have any questions. Installation Methods...
- Page 5 Note: High Leg must be B Phase 20 AMP, 3-POLE CIRCUIT BREAKER FIG. 3: TRANSEND 120/240-3GHD PHASE A 3-Phase, 4-Wire, ORANGE High-Leg DELTA PHASE C GREEN WHITE BOND CONDUCTORS FURNISHED WITH EARTH TRANSEND GROUND ™ JOSLYN ® TRANSEND INSTALLATION, OPERATION AND MAINTENANCE MANUAL ISSUED 6.01...
- Page 6 PHASE A PHASE B GREEN WHITE TRANSEND Mounting Four 5/16-inch holes are provided for mounting the TransEnd FiG. 5 4" 7 1/2" Mounting Hole Detail 6" 1" 6 3/4" 3/8" ™ JOSLYN ® TRANSEND INSTALLATION, OPERATION AND MAINTENANCE MANUAL ISSUED 6.01...
-
Page 7: Electrical Connections
TransEnd model being installed. Do not hi- pot the electrical system that the TransEnd is connected to without disconnecting all TransEnd conductors including phases, neutral and ground. ™ JOSLYN TRANSEND INSTALLATION, OPERATION AND MAINTENANCE MANUAL ISSUED 6.01 ®... - Page 8 ➤ Apply power to unit by closing the circuit breaker. Applying Power: Checklist ➤ Check TransEnd lights. Protection is active when all lights are illuminated. Call Joslyn Technical Support if you experience either Troubleshooting of these conditions: • Circuit breaker trips and cannot be reset •...