Related Manuals for EasyCare HBCWOB
Summary of Contents for EasyCare HBCWOB
- Page 1 General Us er/S afety Guide HEADBOARD AND FOOTBOARD BUMPER www.easycaresystems.co.uk...
- Page 2 www.easycaresystems.co.uk...
-
Page 3: Table Of Contents
CONTENTS WARNINGS & CAUTIONS WARNINGS & CAUTIONS PRODUCT OVERVIEW PRODUCT OVERVIEW GENERAL INFORMATION GENERAL INFORMATION INSTALLATION INSTALLATION 8-10 CLEANING AND CARE CLEANING AND CARE www.easycaresystems.co.uk... -
Page 4: Warnings & Cautions
WARNINGS & CAUTIONS READ THIS INSTRUCTION MANUAL CAREFULLY. PLEASE NOTE IN PARTICULAR THAT THE SAFETY INSTRUCTIONS MUST BE OBSERVED. WARNING Please ensure that this instruction is read and understood prior to first use, if any of th e instruction is unclear , please contact Har vest Healthcare Ltd. -
Page 5: Product Overview
PRODUCT OVERVIEW PRODUCT CODES: HBCWOB & HBCCOM1.12 & HBCULT PRODUCT DESCRIPTION Headboard and Footboard Bumper The Head and Footboard bumper fits all W oburn and Community Beds. Providing extra protection for the user at the head and footend of the bed. -
Page 6: General Information
GENERAL INFORMATION INSTRUCTIONS FOR USE Check the product for damage, and if it is the correct type of product for the bed, before carrying out the installation. • If a bumper netting or any other part of the product looks damaged do not fit the bumper . - Page 7 GENERAL INFORMATION MOVING, HANDLING AND STORAGE Where possible, the bumper system should be stored flat to prevent damage to the product. It may require more than one person to aid in fitting the system. The bumper system is to be stored between -5 to +40 degrees, in a dr y environment.
- Page 8 INSTALLATION 1. Lay the bumper on the platform by the headboard 2. Attach the lower mounting clip to the bottom of the headboard. 3. Position the bumper against the headboard and pull the strap on the inside of the bumper up the and over the top of the headboard, ensuring the bumper is positioned centrally and the stap is in line with the lower mounting.
- Page 9 INSTALLATION 4. Attach the upper headboard strap fixing on the outside of the headboard below the lip created by the top of the headboard (you will need to remove the backing of the Nano tape) 5. Pull the strap between the headboard and bumper down to pull the top section of the bumper to the top of the headboard (do this for all 4 straps) www.easycaresystems.co.uk...
- Page 10 INSTALLATION 6. Pull the strap (at the buckle) to pull the lower portion of the bumper against the headboard. 7. The bumpers should look like this. www.easycaresystems.co.uk...
- Page 11 CLEANING & CARE WARNING Eye protection, gloves, and protective clothing should be worn when carrying out cleaning and disinfection procedures. When disinfecting the system, Har vest Healthcare recommends the following guidelines which have been developed to comply with recognised infection control procedures. These procedures are also to be used to prevent cross infection when transferring the system between patients.
- Page 12 Special Products and Service Contact Us Units 5 and 6 Lower Vicarage Road Southampton Hampshire SO19 7RJ T: 02380 420678 E: info@easycaresystems.co.uk www.easycaresystems.co.uk...
Need help?
Do you have a question about the HBCWOB and is the answer not in the manual?
Questions and answers