Camera; Initializing Remote Devices - Dahua NVR41-4KS2 Series User Manual

5.7 Camera

5.7.1 Initializing Remote Devices

You can change the login password and IP address of a remote device when you initialize it.
● When you connect a camera to the NVR via PoE port, NVR automatically initializes the camera.
The camera adopts NVR current password and email information by default.
● When you connect a camera to the NVR via PoE port after NVR is upgraded to the new version,
the NVR might fail to initialize the camera. You need to initialize the camera manually.
Step 1 Log in to the local system of the Device.
Step 2 Right-click the live page and then select Main Menu > CAMERA > Camera List > Camera
List.
Step 3 Click Uninitialized, and then click Search Device.
The Device displays cameras to be initialized.
Step 4 Select a camera to be initialized and then click Initialize.
Step 5 Set password and email information for the remote device.
If you select Using current device password and email info, the remote device
automatically uses NVR admin account information (login password and email). You can
skip this step.
1) Cancel the selection of Using current device password and email info.
Figure 5-47 Enter password
132
User's Manual