ASROCK AMD X670 Series Setup Manual page 65

AMD X670/B650 Series
FEATURE FCLK DPM
Allows you to enable or disable FEATURE FCLK DPM.
Configuration options: [Auto] [Disabled] [Enabled]
SyncFifo Mode Override
Allows you to enable or disable SyncFifo Mode Override. When it is set to [Auto], SyncFifo
Mode is disabled.
Configuration options: [Auto] [Disabled] [Enabled]
Soc Miscellaneous Control
Press [Enter] to configure Soc Miscellaneous Control.
AGESA MPM Support
Allows you to enable or disable AGESA MPM Support. This only works on the platform
which is AIM-T capable.
Configuration options: [Auto] [Disabled] [Enabled].
ABL Console Out Control
[Enabled] Select this item to enable ConsoleOut Function for ABL.
[Disabled] Select this item to disable ConsoleOut Function for ABL.
Pluton (HSP) Options
Press [Enter] to configure Pluton (HSP) Options.
Pluton (HSP) X86 Firmware Support
Allows you to enable or disable X86 firmware HSP related code path, including AGESA
HSP module, and SBIOS HSP related driver.
[Auto] Depends on PcdAmdHspCoreEnable build value.
NOTE:
PSP directory entry 0xB BIT36 have the highest priority.
This option will NOT put HSP hardware in disabled state. To disable HSP hardware, you
need to set up PSP directiry entry OxB, BIT36 to 1.
// EntryValue[36] = 0: Enable, HSP core is enabled.
// EntryValue[36] = 1: Disable, HSP core is disabled and then PSP will gate the HSP clock;
no further PSP to HSP commands. System will boot without HSP.
Configuration options: [Auto] [Disabled] [Enabled].
Pluton (HSP) UART
HSP Firmware will print debug information to FCH UART. Select to enable or disable this
function. By default, it will be disabled.
Configuration options: [Auto] [Disabled] [Enabled].
Pluton (HSP) FIPS
Allows you to enable or disable FIPS mode for HSP.
Configuration options: [Auto] [Disabled] [Enabled].
61