Sauder 414405 Instruction Booklet page 26

22 22
BLACK 1-7/8" FLAT HEAD SCREW
(4 used for the MOLDINGS)
Fasten a DRAWER MOLDING (V) to the RIGHT DRAWER FRONT (R). Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S).
Fasten the RIGHT DRAWER FRONT (R) to a DRAWER FRONT/BACK (D122). Use two BLACK 7/8" LARGE HEAD SCREWS (17S).
Repeat this step for the other drawer using the LEFT DRAWER FRONT (S).
Page 26
V
2S
R
V
www.sauder.com/services
R
These edges
should be even.
D122
BLACK 7/8" LARGE HEAD SCREW
(4 used for the DRAWER FRONTS)
17S
414405