Advertisement
21
21
D127
Fasten two DRAWER SIDES (D89) to a DRAWER FRONT/BACK (D122). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure you turn the screws in until they are flush with the surface of the DRAWER SIDES.
Slide the DRAWER BOTTOM (D127) into the grooves in the DRAWER SIDES and DRAWER BACK.
Fasten a DRAWER FRONT/BACK (D122) to the DRAWER SIDES (D89). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure you turn the screws in until they are flush with the surface of the DRAWER SIDES.
Repeat this step for the other drawer.
414405
D89
Groove
D89
D122
www.sauder.com/services
BLACK 1-9/16" FLAT HEAD SCREW
D122
D89
D89
30S
30S
(16 used in this step)
D89
D89
D122
Page 25
Advertisement
