Pressing Mugs; Create Printed Mugs With Ease - Technotape HPM.MFS.350.002 Instruction Manual

OPERATING THE PRESS

PRESSING MUGS

Create printed mugs with ease

Choose your favorite image, place it
on the mug and secure it using heat
tape.
Set the lowest temperature, printing
temperature and printing time
Release the handle when the time
is up. Be careful when removing the
mug. It's hot!
5
Adjust the pressure by turning the
pressure regulator. Close the press to
find the best setting.
When the machine is heating up to
the lowest temperature, place a mug
in the press and close it.
Remove the paper and tape to reveal
the printed mug!
Switch on the Multipurpose Mug
Press.
Press the Start Button. The press
will start heating up from the
lowest temperature to the printing
temperature and then count down.
PRODUCTION TIPS
For the best result, dip the
product immediately into cold
water after sublimation.
To release the Heat Transfer
Tape easily, double fold one end
of the tape.
Use clean products only to
prevent dust and dirt to obstruct
a clear transfer process.