Kenwood RC-R0816 Operation Manual

Simplified Remote Control Operation Guide
1. Confirm the brand of Product that you are
trying to control and write down the 3 digit
code
2. Press and hold the SOURCE POWER Key
3. While holding the SOURCE POWER Key enter
the 3 digit Code for the device
4. The Remote control will respond with the word
O.K (RC-R0816 Only) or ERROR. (Please Begin
from Step 1 if ERROR Shows)
5. Release the SOURCE POWER key
6. Select and press the button of the type of
Device that you have just input the code for in
the REMOTE MODE AREA...There are 6
Choices
7. Press and Hold the SOURCE POWER Key and
point the remote control at the device you are
programming
8. If the Unit turns OFF or ON, the code the you
have input is correct
9. If the Unit does not respond, please try another
code or use the remote controls Learning
Functions (RC-R0816 Only)