Advertisement
Quick Links
Advertisement
Related Manuals for Cyrusher KT-LCD3
Summary of Contents for Cyrusher KT-LCD3
- Page 1 KT-LCD3 Computer Manual For Bike Models KUATTRO www.cyrusher.com...
- Page 2 KT-LCD3 TECHNICAL SYMBOL DEFINITION Handlebar Control T T M ASSIST AV S M X S MOTOR F Km / H CRUISE LCD Display Up Button 6 Km/h Push Power Assist. KM/H SW Button Riding Speed (metric) DOWN Button Riding Speed (imperial)
- Page 3 T T M Riding at a speed above 7 km/h, hold the ASSIST AV S M X S 3 seconds to activate cruise control. Use the MOTOR break to cancel the cruise control. Km / H CRUISE CYRUSHER.COM Page 2...
- Page 4 Km / H CRUISE T T M ASSIST AV S M X S Total Riding Distance MOTOR Km / H CRUISE T T M ASSIST AV S Single Riding Average Speed M X S MOTOR Km / H CRUISE CYRUSHER.COM Page 3...
- Page 5 For example, if the motor and controller fixed top speed limit is at 40KM/H, you can only set lower top limit such as 35KM/H, then the e-bike will keep run within the top speed limit -- 35KM/H; If you set 50KM/H, the real top speed limit is only 40KM/H; CYRUSHER.COM Page 4...
- Page 6 Rage:0-16, XF800 default code is 1; ASSIST AV S M X S Press switch to P2, press MOTOR change data required. Km / H This technical setting is only for engineer setting, do not modify or change the setting. CRUISE CYRUSHER.COM Page 5...
- Page 7 C1. PAS Sensor Sensitivity Setting Range: 0-07; XF800 default code is 07;When you see C1 is flashing, press change data required. This technical setting is only for engineer setting, do not modify or change the setting. CYRUSHER.COM Page 6...
- Page 8 M X S Press switch to C4, press MOTOR Km / H change data required. CRUISE When P4=0, C4=0, Throttle works Zero Boost When P4=0, C4=1, Throttle works as Zero Boost and Max speed 6KM/H; When P4=0, C4=3/4/5 CYRUSHER.COM Page 7...
- Page 9 Range: 0-1, XF800 default code is 0; ASSIST AV S M X S 0—Inactive LCD restart password function; 1-- MOTOR active LCD restart password function. Km / H Press switch to C9, press change data required. CRUISE CYRUSHER.COM Page 8...
- Page 10 Remember you need to press to confirm the saved password. If you forget your password, it may require extra tool and cost to help to restart the bike computer and Cyrusher will not take any responsibility for the password setting made by customer.
- Page 11 AV S M X S MOTOR 03—info: Motor hall signal Abnormality Km / H CRUISE 04—info: Torque sensor signal Abnormality 05—info: Axis speed sensor Abnormality(only applied to torque sensor) 06—info: Motor or controller has short circuit Abnormality CYRUSHER.COM Page 10...
Need help?
Do you have a question about the KT-LCD3 and is the answer not in the manual?
Questions and answers