Commissioning; Setting On "Smart Access Point; Adding Audio Ip Via "Smart Access Point - ABB H82001-W Product Manual

8

Commissioning

8.1

Setting on "Smart Access Point"

8.1.1

Adding Audio IP via "Smart Access Point"

Precondition
Audio IP must be powered on.
■
Smart Access Point version should be 5.92 or later.
■
■ Audio IP should not be signed by other "Smart Access Point". If Audio IP has been signed
by other "Smart Access Point", you need to clear the signature, e.g. reset the Audio IP by
pressing and holding the reset button for 3 seconds on the back.
Please follow the steps below:
[1] On the configuration screen of "Smart Access Point", click "Door entry system" to access
the corresponding screen.
Product manual 2TMD042200D0001
Commissioning
│15