ABB H82001-W Product Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Conference System
  5. H82001-W
  6. Product manual
ABB H82001-W Product Manual

ABB H82001-W Product Manual

Abb-welcome audio ip
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2TMD042200D0001 │ 31.08.2022
Product manual
ABB-Welcome IP
H82001-W Audio IP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H82001-W and is the answer not in the manual?

Questions and answers

Related Manuals for ABB H82001-W

Summary of Contents for ABB H82001-W

  • Page 1 2TMD042200D0001 │ 31.08.2022 Product manual ABB-Welcome IP H82001-W Audio IP...

  • Page 2: Table Of Contents

    Tab le of c ont e nts Notes on the instruction manual ......................4 Safety ..............................4 Intended use ............................4 Environment ............................5 ABB devices ..........................5 Product description ..........................6 Device type ..........................6 Control elements........................7 Terminal description ......................... 10 Technical data ............................
  • Page 3 Table of contents 9.1.2 Intercom ..........................55 9.1.3 Unlock ..........................56 9.1.4 Turn on a light ........................57 9.1.5 SOS ............................. 58 Cyber security ............................ 59 10.1 Disclaimer ..........................59 10.2 Performance and service ......................60 10.3 Deployment guideline....................... 60 10.4 Upgrading..........................

  • Page 4: Notes On The Instruction Manual

    Please keep this manual in a safe place. If you pass the device on, also pass on this manual along with it. ABB accepts no liability for any failure to observe the instructions in this manual. Safety...

  • Page 5: Environment

    ABB devices All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always dispose of the packing materials and electric devices and their components via an authorized collection facility or disposal company.

  • Page 6: Product Description

    Product description Product description Device type Size (DxHxW) Article Order number Product name Colour number Unit: mm H82001-W 2TMA130011W0001 Audio IP, induction loop White 81 x 198 x 43 │6 Product manual 2TMD042200D0001...

  • Page 7: Control Elements

    Product description Control elements Description Handset ■ During a call request, pick up the handset within 30 seconds to accept the call. ■ During communication, hang up the handset to terminate the call. Induction Loop symbol The device is equipped with a hearing loop for coupling the audio signal into hearing aids. ■...
  • Page 8 Product description Description Unlock button ■ *In standby status, press the button to release the default lock of the default outdoor station. (A default outdoor station should be set on the "Smart Access Point" before use). ■ In standby status, hold the button for 10 seconds to enable the "Automatic unlock" function. The LED (red) illuminates to indicate that the "Automatic unlock"...
  • Page 9 Product description LED Overview Icon Description Red LED always on Blue LED always on Red LED flashes slowly Blue LED flashes slowly Red LED flashes fast Blue LED flashes fast LED status LED status Description "Auto-unlock" function is enabled. Mute the speaker or the microphone. Unsigned status or enters the setting mode.

  • Page 10: Terminal Description

    Product description Terminal description Description A potential-free contact, such as a doorbell Micro SD card slot (only for factory use) LAN (PoE), PoE is the only power supply for this device Reset button │10 Product manual 2TMD042200D0001...

  • Page 11: Technical Data

    Technical data Technical data Designation Value ⎓ Rating voltage 48 V ⎓ Operating voltage 38-57 V ⎓ Rating current 48 V , 40 mA Operating temperature -10 °C…+55 °C Storage temperature -25 °C…+70 °C PoE standard IEEE802.3 af IP level IP 30 Size (DxHxW) 81 x 198 x 43 mm...

  • Page 12: Mounting/Installation

    Mounting/Installation Mounting/Installation Warning Electric voltage! Dangerous currents flow through the body when coming into direct or indirect contact with live components. This can result in electric shock, burns or even death. – Disconnect the mains power supply prior to installation and/or disassembly! –...

  • Page 13: Product Dimensions

    Mounting/Installation Product dimensions Unit: mm 20.9 Installation height 1.5 m 5 feet │13 Product manual 2TMD042200D0001...

  • Page 14: Surface-Mounted Installation

    Mounting/Installation Surface-mounted installation Surface-mounted box 83.3 79.2 NEMA&Italy Global VDE&BS&CN Swiss Installation maximum length: 100 mm Optional 1. Disassemble the upper part from the bottom part by using a screwdriver 2-A. Affix the bottom part on the wall 2-B. Affix the bottom part on the box 3.

  • Page 15: Commissioning

    Commissioning Commissioning Setting on "Smart Access Point" 8.1.1 Adding Audio IP via "Smart Access Point" Precondition Audio IP must be powered on. ■ Smart Access Point version should be 5.92 or later. ■ ■ Audio IP should not be signed by other "Smart Access Point". If Audio IP has been signed by other "Smart Access Point", you need to clear the signature, e.g.
  • Page 16 Commissioning [2] Click "Add device". [3] Select "Indoor station" from the drop-down list. [4] Enter block number. [5] Enter floor number [6] Enter room number. [7] Enter device ID: Master indoor station, device ID is 1. ■ Slave indoor station: ■...

  • Page 17: Adding Audio Ip Via App

    Commissioning 8.1.2 Adding Audio IP via App Precondition Audio IP must be powered on. ■ ■ Audio IP should not be signed by other "Smart Access Point". If Audio IP has been signed by other "Smart Access Point", you need to clear the signature, e.g. reset the Audio IP by pressing and holding the reset button for 3 seconds on the back.
  • Page 18 Commissioning [4] Enter the device ID: ■ Master indoor station, device ID is 1. ■ Slave indoor station: – If Audio IP is connected to the common network, device ID can be 2-3. – If Audio IP is connected to the home network, device ID can be 2-32. Apartment 1 *Max 32 indoor stations in the same apartment.

  • Page 19: Importing A Building Structure Via App

    Commissioning 8.1.3 Importing a building structure via App "Smart Access Point" can import the building structure from the App. It is permitted to import one building or multiple buildings as a batch. Importing rule Building structure will be overwritten according to the building number. "Smart Access Point"...
  • Page 20 Commissioning Please follow the steps below: [1] On the "Main menu" screen of "Smart Access Point", click [2] A pop-up window will be displayed on the screen. Now turn to the App. │20 Product manual 2TMD042200D0001...
  • Page 21 Commissioning [3] Open the App, turn to a designated project screen, swipe the project to the right. [4] Click [5] Click the designated "Smart Access Point". [6] Enter the admin name and password which is used to login "Smart Access Point". [7] Click "OK".

  • Page 22: Accessing The Setting Screen

    Commissioning 8.1.4 Accessing the setting screen Please follow the steps below: [1] On the "Main menu" screen of "Smart Access Point", Click "Door entry system". [2] Click "Indoor stations". [3] Go to "Audio Indoor Station" section. [4] Click the designated Audio IP. │22 Product manual 2TMD042200D0001...

  • Page 23: Basic Information

    Commissioning 8.1.5 Basic information On the designated Audio IP screen, Description View the physical address View the logical address View the IP address View the first name and the last name of the resident or the tenant View the serial number View the firmware version View the signature │23...

  • Page 24: Call Button Setting

    Commissioning 8.1.6 Call button setting Access the setting screen Please follow the steps below: [1] On the designated Audio IP screen, go to the "Button settings" section. [2] Click "Call options". The call button can be set to 3 types of functions. Intercom to same unit Please follow the steps below: [1] On the "Call options"...
  • Page 25 Commissioning Intercom to other unit Please follow the steps below: [1] On the "Call options" screen, select "Intercom to other unit". [2] Set the position for the designated indoor station, e.g. building, floor and apartment. [3] Click "Save". Call guard unit Please follow the steps below: [1] On the "Call options"...

  • Page 26: Unlock Button Setting

    Commissioning 8.1.7 Unlock button setting Access the setting screen Please follow the steps below: [1] On the designated Audio IP screen, go to the "Button settings" section. [2] Click "Door lock settings". The unlock button can be set to 2 types of functions. Open door with Outdoor station Please follow the steps below: [1] On the "Door lock settings"...
  • Page 27 Commissioning Open door with IP actuator Please follow the steps below: [1] On the "Door lock settings" screen, select "Open door with IP actuator ". [2] Select the designated IP actuator connected by the lock. [3] Select the lock type, it can be set to "Default lock" or "Subsidiary lock". [4] Click "Save".

  • Page 28: Light Button Setting

    Commissioning 8.1.8 Light button setting Please follow the steps below: [1] On the designated Audio IP screen, go to the "Button settings" section. [2] Click "Light switch". [3] Select the designated IP actuator connected by the light. [4] Click "Save". │28 Product manual 2TMD042200D0001...

  • Page 29: Programmed Button Setting

    Commissioning 8.1.9 Programmed button setting Access the setting screen Please follow the steps below: [1] On the designated Audio IP screen, go to the "Button settings" section. [2] Click "Button 1/2". The programmed button can be set to 7 types of functions. Intercom to same unit Please follow the steps below: [1] On the "Button 1/2"...
  • Page 30 Commissioning Intercom to other unit Please follow the steps below: [1] On the "Button 1/2" screen, select "Intercom to other unit". [2] Set the position for the designated indoor station, e.g. building, floor and apartment. [3] Click "Save". Call guard unit Please follow the steps below: [1] On the "Button 1/2"...
  • Page 31 Commissioning Open door with Outdoor station Please follow the steps below: [1] On the "Button 1/2" screen, select "Open door with Outdoor station". [2] Select the designated outdoor station or gate station. [3] Select the lock type, it can be set to "Default lock" or "Subsidiary lock". [4] Click "Save".
  • Page 32 Commissioning Light switch Please follow the steps below: [1] On the "Button 1/2" screen, select "Light switch". [2] Select the designated IP actuator connected by the light. [3] Click "Save". SOS call Guard unit address needs to be set before SOS call. Please follow the steps below: [1] On the "Button 1/2"...

  • Page 33: Guard Unit Setting

    Commissioning 8.1.10 Guard unit setting Please follow the steps below: [1] On the designated Audio IP screen, go to "Guard unit settings" section. [2] Click "Guard unit settings". [3] Set the default Guard unit. [4] Click "Save". │33 Product manual 2TMD042200D0001...

  • Page 34: Physical Address & Ip Address Setting

    Commissioning 8.1.11 Physical address & IP address setting Topology Apartment 1 *Max 32 indoor stations in the same apartment. Master IS Slave1 Home router Slave 2 Apartment 2 *Max 3 indoor stations in the same apartment. PoE switch Outdoor station Master IS Slave 1 Slave 2...
  • Page 35 Commissioning Access the setting screen Please follow the steps below: [1] On the designated Audio IP screen, go to "Additional settings" section. [2] Click "Physical address & IP address". Master mode Only the Audio IPs connect to common network can be set to "Master mode". Please follow the steps below: [1] On the "Physical address &...
  • Page 36 Commissioning Subsidiary mode Please follow the steps below: [1] On the "Physical address & IP address" screen, select "Subsidiary mode". [2] Enter the physical address. [3] IP address setting: ■ If Audio IP connects to common network, then IP address is generated automatically and cannot be modified.
  • Page 37 Commissioning Independent mode Only the Audio IPs connect to common network can be set to "Independent mode". Please follow the steps below: [1] On the "Physical address & IP address" screen, select "Independent mode". [2] Enter the physical address. [3] IP address is generated automatically and cannot be modified. [4] Click "Save".

  • Page 38: Logical Address Setting

    Commissioning 8.1.12 Logical address setting Please follow the steps below: [1] On the designated Audio IP screen, go to "Additional settings" section. [2] Click "Logic address". [3] Enter the logical address. [4] Click "Save". │38 Product manual 2TMD042200D0001...

  • Page 39: Ringtone Setting

    Commissioning 8.1.13 Ringtone setting Please follow the steps below: [1] On the designated Audio IP screen, go to the "Additional settings" section. [2] Click "Ringtone". [3] Select the designated ringtones for different types of devices (5 types of ringtones can be selected).

  • Page 40: Renaming The Device

    Commissioning 8.1.14 Renaming the device Please follow the steps below: [1] On the designated Audio IP screen, go to "Additional settings" section. [2] Click "Resident(s)/Tenant(s)". [3] Enter the last name and the first name. [4] Click "Save". │40 Product manual 2TMD042200D0001...
  • Page 41 Commissioning [5] The name is displayed on the screen. │41 Product manual 2TMD042200D0001...

  • Page 42: Local Firmware Update

    Commissioning 8.1.15 Local Firmware update Please follow the steps below: [1] On the designated Audio IP screen, go to "Additional settings" section. [2] Click "Local firmware update". [3] Click "Browser" to add the firmware update file. [4] Click "Browser" to add the firmware signature file. [5] Click "Save"...
  • Page 43 Commissioning [6] Click "√" after uploading the update files successfully. [7] Click "Save". [8] Click "√" to accept the "End User License Agreement". │43 Product manual 2TMD042200D0001...
  • Page 44 Commissioning [9] A pop-up window appears to indicate the updating details e.g. Device ID & updating progress. ■ The pop-up window can be hidden by clicking "Minimize". ■ The updating will be stop if "Cancel the update" is clicked. [10] Click "Close" to complete the update. │44 Product manual 2TMD042200D0001...

  • Page 45: Online Firmware Update

    Commissioning 8.1.16 Online firmware update Please follow the steps below: [1] On the designated Audio IP screen, go to "Additional settings" section. [2] Click "Online firmware update" ("Smart Access Point" must be connected to the Internet). [3] Current firmware version is displayed on the screen. [4] New firmware version is detected automatically from the website.

  • Page 46: Multiple Devices Setting

    Commissioning 8.1.17 Multiple devices setting Please follow the steps below: [1] On the "Indoor stations" screen, go to "Audio Indoor Station" section. [2] Click [3] Select the designated Audio IPs. [4] Click "Next". │46 Product manual 2TMD042200D0001...
  • Page 47 Commissioning [5] Select the designated function and carry on the same setting for multiple devices. [6] Click "Save". │47 Product manual 2TMD042200D0001...

  • Page 48: Setting On Local Device

    Commissioning Setting on local device 8.2.1 Ring volume setting Adjust the three-level selector (maximum/medium/low) to set the ringtone volume. │48 Product manual 2TMD042200D0001...

  • Page 49: Ringtone Setting

    Commissioning 8.2.2 Ringtone setting Changing Outdoor station ringtone Please follow the steps below: [1] In standby status, press and hold the light button for 5 seconds to enter the setting mode (Red LED and blue LED flash slowly at the same time). [2] Press the lock button to play the current ringtone.
  • Page 50 Commissioning Changing Doorbell ringtone Please follow the steps below: [1] In standby status, press and hold the light button for 5 seconds to enter the setting mode (Red LED and blue LED flash slowly at the same time). [2] Press the mute button to play the current ringtone.

  • Page 51: Talking Volume Setting

    Commissioning 8.2.3 Talking volume setting During communication, press and hold the light button for 5 seconds to access the setting mode and then select the designated volume by pressing this button repeatedly (5 levels of volume can be selected). Press and hold the light button for 5 seconds again to exit the setting.

  • Page 52: Auto Unlock Setting

    Commissioning 8.2.4 Auto unlock setting The "Automatic unlock" function means the door will be unlocked automatically during a call request. This function will be disabled automatically after 10 hours. In standby status, press and hold the lock button for 10 seconds to enable the "Automatic unlock"...

  • Page 53: Resetting The Device

    Commissioning 8.2.5 Resetting the device Please follow the steps below: [1] Disassemble the upper part from the bottom part by using a screwdriver. [2] Pressing and holding the reset button (on the upper part) 3 seconds to reset the device. Note Building address, signature and all parameters will be restored to factory settings after the reset operation.

  • Page 54: Operation

    Operation Operation 9.1.1 Incoming call During a call request, pick up the handset within 30 seconds to accept the call. ■ ■ During communication, hang up the handset to terminate the call. During a call request, press the mute button to mute the ringtone.

  • Page 55: Intercom

    Operation 9.1.2 Intercom 1. Intercom via call button Precondition Call button should be set before use. Please see chapter 8.1.6 “Call button setting“ on page 24. Operation In standby status, pick up the handset and press the call button to initiate an intercom. 2.

  • Page 56: Unlock

    Operation 9.1.3 Unlock 1. Unlock via unlock button Precondition Unlock button should be set before use. Please see chapter 8.1.7 “Unlock button setting“ on page 26. Operation In standby status, press the unlock button to release the designated lock. 2. Unlock via programmed button Precondition Programmed button should be set before use.

  • Page 57: Turn On A Light

    Operation 9.1.4 Turn on a light 1. Turn on light via light button Precondition Light button should be set before use. Please see chapter 8.1.8 “Light button setting“ on page Operation In standby status, press the light button to turn on the designated light. 2.

  • Page 58: Sos

    Operation 9.1.5 Precondition Programmed button should be set to "SOS call" before use. Please see chapter 8.1.9 “Programmed button setting“ on page 29. Operation In standby status, press and hold the designated programmed button at least 2 seconds to send an alarm to Guard unit or "Smart Access Point".

  • Page 59: Cyber Security

    H82001-W product, the network, its system and interfaces against any kind of security breaches, unauthorized access, interference, intrusion, leakage and/or theft of data or information. ABB Ltd and its affiliates are not liable for damages and/or losses related to such security breaches, unauthorized access, interference, intrusion, leakage and/or theft of data or information.

  • Page 60: Performance And Service

    Cyber security 10.2 Performance and service Network performance Type Value Ethernet 36 Mbps (53,568 packets/s) 17 Mbps (25,296 packets/s) ICMP 14 Mbps (20,832 packets/s) 22 Mbps (32,736 packets/sec) 22 Mbps (32,736 packets/sec) Port and service Port Service Purpose 5060 To be used by sip client. 5061 To be used by sip server 5070...

  • Page 61: Upgrading

    While ABB provides maximum security for its products, it strongly advises users not to disassemble the devices or even replace components, which could lead to malware intrusion.

  • Page 62: Notice

    We reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible errors or incompleteness in this document.
  • Page 63 Contact us Notice We reserve the right to at all times make technical changes as well as ABB Xiamen Smart Technology Co., Ltd. changes to the contents of this No. 881, FangShanXiEr Road, Xiang’An Industrial document without prior notice. Area, Torch Hi-Tech Industrial Development...

Table of Contents