Advertisement
Touch Pad
The Touch Pad controls vibrato depth and speed by default when no effect LED is lit.
Press the Effect button repeatedly to cycle through different sets of effects. When you select one from the 2-5 sets, the corresponding
effect LED will turn on.
After selecting a set of effects, use the Touch pad to control these effects in real time.
Piano Mode
Press the Piano button to enter or exit Piano Mode.
In Piano Mode, all parameters become optimized for concert piano performance. You can start style playback, but it will play the rhythm
track only.
Notes: When in Piano Mode is engaged, the Fingered function will be automatically turned off. In Piano Mode, the Layer and Split
functions will not be available.
Twinova
The Twinova function splits the keyboard into two areas with the same sound and octave range, for the convenience of playing together
with a friend or instructor.
Press the Split and Layer buttons at the same time to turn Twinova on or off. The default split point is E4 and F4.
To change the Twinova octave:
1.
Press the Function button to enter the function menu.
2.
Use the data dial to select "TwinoOct".
3.
Use the [<] / [>] buttons to change the octave setting.
Pressing both [<] and [>] buttons at the same time will reset to the default octave setting.
Note: The Twinova mode and the split / layer functions cannot be used at the same time.
Using the Metronome
To turn the metronome on or off:
1.
Press the Metro button to turn on the metronome. The beat indicators on LCD will blink and you will hear the metronome sound.
2.
Press this button again to turn off the metronome.
The default metronome beat is 4; this can be changed in the Function menu.
To change the metronome beat:
1.
Press the Function button, then use the data dial to select "Beat".
2.
Use the [<] / [>] buttons to change the beat setting. The setting range is 0, 2 ~ 9.
Notes:
1.
If you turn on the metronome during style playback, the metronome sound will start from the next beat. Its time signature and tempo
will be reset to match the selected style.
2.
If you turn on the metronome during MIDI recording, the metronome sound will not be recorded. But if you turn on the metronome in
Audio recording, the metronome sound will be recorded
6
#
X-axis
Target
1
Vibrato Speed
2
LPF
Global
3
HPF
Global
4
Reverb
Global
5
Release
Channel
Y-axis
Target
Vibrato Depth
Resonance (LPF)
Global
Resonance (HPF)
Global
Delay
Channel
Sidechain Comp
Channel
Advertisement
