Table of Contents
Advertisement
Uranus Meteo Sensor
6.3
REMOTE USAGE
If you are going to install the device into your observatory, just plug the USB cable
and let Uranus run with the USB cable attached. The battery will be fully charged
once but will never provide power to the device.
The device automatically selects the USB power source and drops to zero the
battery power consumption. As soon as the USB cable is plugged in, sleep mode
is disabled. This ensures that Uranus is always up and running during USB
operation.
When Uranus exchanges information with PC, the OLED display is automatically
turned to off. This ensures that light from screen
1) will not affect astronomical observations inside a roll-off observatory or any other
facility.
2) will not affect the Sky Quality measurement.
Page 21 of 38
Pegasus Astro - Uranus Meteo Sensor Manual
Advertisement
Table of Contents
