Table of Contents
Advertisement
Uranus Meteo Sensor
6.2
MOBILE USAGE
Press the right [>>] button once, in order to bring Uranus, from sleep mode, back
to normal operation. The device instantly boots and the Pegasus Logo is visible on
the OLED display for about a second. After that, the device is fully operational.
GPS is also operational with satellite data in about 5-6 seconds (GPS warm start).
Please note that if more than 3 days have passed since the last GPS operation,
the GPS receiver might take longer (up to 30 seconds) to locate and track
ephemeris data of available satellites.
Press [>>] button to move forward or press [<<] button to move backward to all
available display pages of the device
[For detailed information please read "On Screen Display Menus" section of this document]
Keep pressing [>>] (Measure) button for 2 seconds to trigger a Sky Quality
measurement. Remember to point the device towards the area of the sky you
would like to acquire a light measurement.
Keep pressing [>>] (Measure) button for 5 seconds to turn off the display. Device
will still enter in sleep mode after the configured time period. Press any button to
turn it on again
Page 19 of 38
Pegasus Astro - Uranus Meteo Sensor Manual
Advertisement
Table of Contents
