Leister LE 5000 HT-U Operating Manual page 11

Conformity
EU Declaration of Incorporation
(in terms of the EC machinery directive 2006/42/EC; Appendix II A)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machinery
Designation:
Model:
- as far as it is possible from the scope of supply – fulfills the applicable essential requirements of the EC machinery
directive (2006/42/EC).
The incomplete machine is furthermore in compliance with the requirements of the following EU directive(s):
EU directive(s):
Harmonized standards:
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled in
accordance with Annex VII (part B) and will be electronically transmitted to national authorities in response to a
reasoned request.
Authorised documentation representative: Thomas Schäfer, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into which it is to be incor-
porated has been declared in conformity with the provisions of the EC machinery directive (2006/42/EC), where
appropriate.
Kaegiswil, 04/14/2021
UK Declaration of Incorporation
(in terms of The Supply of Machinery (Safety) Regulations 2008, Annex II 1.B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation:
Type:
- as far as it is possible from the scope of supply – fulfills the applicable essential requirements of The Supply of
Machinery (Safety) Regulations 2008 (2008 No. 1597).
The partly completed machinery furthermore complies with the provisions of the following UK Statutory Instruments:
UK Statutory Instruments: 2012 No. 3032 (The Restriction of the Use of Certain Hazardous Substances in
Designated Standards:
Authorised documentation representative: Thomas Schäfer, Manager Product Conformity
Kaegiswil, 03/31/2021
Sealing Unit
LE 5000 HT-U, LE 5000 HT-S
2011/65/EU (RoHS Directive)
EN ISO 12100, EN 60335-1, EN 60335-2-45, EN 62233, EN IEC 63000
Bruno von Wyl, CTO
Sealing Unit
LE 5000 HT-U, LE 5000 HT-S
Electrical and Electronic Equipment Regulations 2012)
EN ISO 12100, EN 60335-1, EN 60335-2-45, EN 62233, EN IEC 63000
Bruno von Wyl, CTO
Christoph Baumgartner, GM
Christoph Baumgartner, GM
11