Advertisement
Table of Contents
Creative Outlier Air
Mobile Device Bluetooth Connectivity
Initial Pairing:
1. The first ear bud removed from the case will be the main unit. The remaining
ear bud will be the secondary unit. Once removed from the charging case,
the main unit will auto-switch to Bluetooth Pairing mode (LED will flash
in Red & Blue).
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Creative Outlier Air
Summary of Contents for Creative Outlier Air
- Page 1 Creative Outlier Air Mobile Device Bluetooth Connectivity Initial Pairing: 1. The first ear bud removed from the case will be the main unit. The remaining ear bud will be the secondary unit. Once removed from the charging case, the main unit will auto-switch to Bluetooth Pairing mode (LED will flash...
- Page 2 This will ensure that the secondary unit will also be registered/paired with the mobile device. In iOS, "Headset" is used to reference to the secondary unit. Android devices, on the other hand, use the term "Outlier Air L" or "Outlier Air R" to refer to the secondary unit.
- Page 3 Once the connection has been made, the secondary unit will auto-pair to the main unit. Your device will then prompt for confirmation on the connection made. No further action required. Note: Do not attempt to pair your device to the secondary unit via Bluetooth.
- Page 4 To pair a new Bluetooth device, follow the steps below: 1. Switch OFF the Bluetooth on the previously paired Bluetooth device to disable the connection made (or remove 'Outlier Air L/R' from the paired Bluetooth list of your Bluetooth device.).
- Page 5 3. Once it is in pairing mode, attempt pairing on the new Bluetooth device. Note: Once the ear buds are connected and start playing audio, the LED lights will power OFF. The LED lights on the ear buds will be flashing Blue when audio is paused.
Need help?
Do you have a question about the Outlier Air and is the answer not in the manual?
Questions and answers