Nortek IQ Drive C5BH-E Installation Instructions Manual

Split system indoor coils

Advertisement

Quick Links

split system Indoor Coils for
INsTAllATION INsTRUCTIONs
CAUTION:
Read the Installation Instructions
supplied with furnace/air handler
and observe all safety requirements
outlined in instructions and/or furnace/
air handler markings before proceeding
with installation of the coil
systems
These instructions are primarily intended to
assist qualified individuals experienced in the
proper installation of this appliance. Qualified
installer must have specific IQ Drive
training. Some local and national codes require
licensed installation/service personnel for this
type of equipment. Read all instructions carefully
before starting the installation.
system
TM

Advertisement

Table of Contents
loading

Summary of Contents for Nortek IQ Drive C5BH-E

  • Page 1 split system Indoor Coils for systems INsTAllATION INsTRUCTIONs These instructions are primarily intended to CAUTION: assist qualified individuals experienced in the proper installation of this appliance. Qualified Read the Installation Instructions installer must have specific IQ Drive system supplied with furnace/air handler training.
  • Page 3: Table Of Contents

    Table of Contents 1. General Information ....................... 4 2. Coil specifications ......................... 4 3. Coil Installation ........................5 • Upflow Furnace • Horizontal Furnace • Horizontal Ready Coils for Horizontal Left Installation • Horizontal Ready Coils for Horizontal Right Installation 4.
  • Page 4: General Information

    1. GENERAl INFORMATION These coils are also equipped with a coil tempera- ture sensor to monitor coil temperature during IQ™ cased coils are designed for upflow ap- dehumidification mode of system operation. plications or horizontal applications. Coils are equipped with braze type refrigerant connections Read the installation manual supplied with the for easy installation.
  • Page 5: Coil Installation

    Remove the drain pan provided for hori- Where precise forming of the refrigerant zontal application. Install the coil and level lines is required, a copper tubing bender it as needed to ensure proper condensate designed for the size lines used is recom- drainage.
  • Page 6: Refrigerant Line Connections

    Note: All condensate pans have primary and To Configure Horizontal Ready Coils for Horizontal LEFT Installations: secondary drain connections to meet FHA requirements. If the application is located in Remove the coil access door. or above a living space where damage may IMPORTANT: Remove the plug from one of result from condensate overflow, a separate the threaded holes in the horizontal drain...
  • Page 7: Completing The Installation

    5. COMPlETING THE 6. MAINTENANCE AND sERVICE INsTAllATION Condensate Drain: WARNING: CAUTION: Ensure that all electrical power to the furnace and outdoor (condensing) unit is The indoor coil must be checked to off before performing any maintenance ensure a level installation. Failure to do or service on the system.
  • Page 8 INsTAllER: PlEAsE lEAVE THEsE INsTAllATION INsTRUCTIONs WITH THE HOMEOWNER Specifications & illustrations subject to change without notice or incurring obligations (07/15). O’Fallon, MO, © Nortek Global HVAC LLC 2015. 7085980 (Replaces 7085540) All Rights Reserved.

This manual is also suitable for:

Iq drive c5bhE36c-bE48c-c

Table of Contents