Gas fired heating, ventilation and cooling units (52 pages)
Summary of Contents for Nortek IQ Drive C5BH-E
Page 1
split system Indoor Coils for systems INsTAllATION INsTRUCTIONs These instructions are primarily intended to CAUTION: assist qualified individuals experienced in the proper installation of this appliance. Qualified Read the Installation Instructions installer must have specific IQ Drive system supplied with furnace/air handler training.
1. GENERAl INFORMATION These coils are also equipped with a coil tempera- ture sensor to monitor coil temperature during IQ™ cased coils are designed for upflow ap- dehumidification mode of system operation. plications or horizontal applications. Coils are equipped with braze type refrigerant connections Read the installation manual supplied with the for easy installation.
Remove the drain pan provided for hori- Where precise forming of the refrigerant zontal application. Install the coil and level lines is required, a copper tubing bender it as needed to ensure proper condensate designed for the size lines used is recom- drainage.
Note: All condensate pans have primary and To Configure Horizontal Ready Coils for Horizontal LEFT Installations: secondary drain connections to meet FHA requirements. If the application is located in Remove the coil access door. or above a living space where damage may IMPORTANT: Remove the plug from one of result from condensate overflow, a separate the threaded holes in the horizontal drain...
5. COMPlETING THE 6. MAINTENANCE AND sERVICE INsTAllATION Condensate Drain: WARNING: CAUTION: Ensure that all electrical power to the furnace and outdoor (condensing) unit is The indoor coil must be checked to off before performing any maintenance ensure a level installation. Failure to do or service on the system.