Major Science Winpact SI-200 User Manual page 8

CAUTION! Still Running!
The shaker still runs after the cover has been opened. Wait for it to stop running.
NOTICE! A torpedo level is needed before operation.
To keep device as balanced as possible, it is recommended to apply a torpedo level especially
necessary at the first time delivery, adjust the foot to ideal level (refer to p.33).
Auto Shuts Off Situation:
-
resume when the lid closes.
-
-
Use high levels of precaution when using any electrical device. Before connecting the electric supply,
check to see if the supply voltage is within the range stated on the rating label, and see to it that the
device be seated firmly. Place the unit in a safe and dry location; it MUST NOT touch any surrounding
objects. Follow the safety precautions for chemicals/dangerous materials, and hot surfaces (after
autoclave/sterilization). If needed, contact a qualified service representative or
service@majorsci.com.
8
Device Interrupt shuts off power to SI-200 when lid opens. Auto
Deviations form temperature set point.
Over temperature warning.