Table of Contents
Advertisement
PAIRING
MULTI-FUNCTION BUTTON
PULSING INDICATOR LIGHT
The first time you take both earphones out of their case they will enter pairing
mode.
STEP 1: Open the Bluetooth menu on your device.
STEP 2: Select M&D MW08.
STEP 3: (OPTIONAL) Download and open the M&D Connect app.
To manually activate pairing mode, hold down the multi-function button until the
indicator light starts pulsing/pairing tone is heard.
NOTE: If you are already connected to a device, remove the earphones from your
ears to avoid activating your voice assistant.
MULTIPOINT
Up to two devices can be connected to MW08 at one time.
1. Remove earphones from case. Press and hold the multi-function button on
right earphone to enter pairing mode. Connect to device 1.
2. Enter pairing mode again and device 1 will disconnect.
3. Connect to device 2 and place earphones in case.
4. Remove earphones from case and they will automatically connect to device
1 and 2 simultaneously.
5. Pause one device and play from the other to swap earphones connection.
PROPRIETARY WIND
REJECTION MESH
ANTENNA
5
Advertisement
Table of Contents
Need help?
Do you have a question about the MW08 and is the answer not in the manual?