Page 1
USER MANUAL – MW08 ACTIVE NOISE-CANCELLING TRUE WIRELESS EARPHONES Master & Dynamic is a New York City-based premium audio company with a deep passion for building technically sophisticated sound tools. Designed to be modern yet timeless, our products utilize only the finest materials and are engineered to last, creating the perfect balance of aesthetics, strength, comfort, and exceptional sound.
Page 2
CONTROLS VOL- VOL+ MULTI-FUNCTION BUTTON PROXIMITY SENSORS MULTI-FUNCTION BUTTON VOL + HOLD VOL+ FOR “AMBIENT LISTENING” MODE ON/OFF 1X: PAUSE / PLAY (SEE PAGE 6 FOR MORE INFORMATION ON AMBIENT LISTENING) 2X: SKIP SKIP BACK VOL - HOLD: MULTI-FUNCTION BUTTON TO ACTIVATE VOICE ASSISTANT HOLD VOL- FOR “ACTIVE NOISE-CANCELLING”...
Page 3
To insert your earphones follow these steps: Your earphones come with medium ear tips attached. STEP 2: Rotate the earphone down STEP 1: Tilt the earphone forward Choose the ear tips that form a seal with your ear canal. Our custom round until the ear tip forms a seal with with the ear tip resting lightly in your ear tips are designed in conjunction with the oval nozzle shape to provide a...
CHARGE Your earphones hold up to 12 hours of charge. The charging case holds an additional 30 hours of charge for your earphones. We suggest you place your earphones inside the case when they are not in use. This will allow them to EARPHONE BATTERY have the maximum charge each time you begin to use them.
PAIRING MULTIPOINT MULTI-FUNCTION BUTTON Up to two devices can be connected to MW08 at one time. 1. Remove earphones from case. Press and hold the multi-function button on right earphone to enter pairing mode. Connect to device 1. PULSING INDICATOR LIGHT 2.
MOBILE APP WORLD VOLUME MODES The MW08 features 2 default World Volume modes to control the volume of the Download the M&D Connect app for the complete Master & Dynamic experience. world around you: USE THE M&D CONNECT APP 1. Hybrid Active Noise-Cancelling (ANC) for clear, expansive sound in any TO ACCESS: environment.
Your charging case is IPX4 rated. Delete any “M&D MW08” earphone connections from your device and then put • It is recommended that you return your earphones to their storage case your earphones into pairing mode and pair again.
BATTERY LEVEL INDICATORS ON CHARGING CASE ARE NOT LIGHTING UP FACTORY RESET Make sure your case is charged. To charge the case, plug one end of the • If your earphones are no longer paired to each other, please use the following USB-C cable into the back of the case and plug the other end into a power steps to perform a factory reset: source.
Page 9
EAR HEALTH Our ability to hear is amazing. Treat your ears like the precious tools they are, M&D CONNECT APP DOES NOT WORK WITH MY DEVICE and they will continue to provide you with exceptional data, as well as a lifetime Make sure your mobile device is compatible with the M&D Connect minimum •...
NIHL WARRANTY NIHL is a preventable condition caused by both one-time and extended Master & Dynamic guarantees this product against defects in materials or exposure to excessive decibel (dB) levels. This harm to sensitive inner ear workmanship for a period of two years from the date of original purchase on structures is irreversible and people of all ages can be affected.
Page 11
Master & Dynamic’s Limited Warranty does not cover normal wear and tear to instructions for return shipment. Please note that the dispatch of a replace- items such as blown drivers, battery degradation from normal use, cut cords, ment product will take place after our receipt of the defective product. For bent jacks, loss or theft.
RF EXPOSURE COMPLIANCE This equipment complies with FCC/ISED radiation exposure limits set forth • for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the MW08 and is the answer not in the manual?
Questions and answers