Plasson PLASSNEST EXPULSION TIMER Quick Setup Manual page 2

Overview
This guide explains how to set up the expulsion system timer and
includes the following steps:
• Initial Timer Setupn (see page 3)
• Programming Nest Opening (see page 6)
• Programming Nest Closing (see page 13)
Nest opening
The timer's C1 channel opens the expulsion grids (i.e., moves them to
vertical position). C1 needs to be active for two minutes.
Nest closing
The timer's C2 channel closes the expulsion grids (i.e., moves them to
diagonal position). C2 needs to be active for six minutes.
2