Recommended Maintenance - Logitech PRO RACING PEDALS Setup Manual

COMBINED PEDALS
This is usually only required if using very old racing titles
Pedals on older racing wheels would often only have
a brake and a gas pedal, with each pedal representing
one half of the same axis Combined Pedal mode
changes the default configuration of the PRO Racing
Pedals from fully separate axes for the brake and
the gas, to a combined mode, so that you should still
be able to use them in older titles that don't support
pedals with separate axes
It is highly recommended for the vast majority of racing
titles that this box is therefore left unticked, in order
to get the most out of your PRO Racing Pedals

RECOMMENDED MAINTENANCE

Your PRO Racing Pedals have been engineered to continue
to operate for many hundreds of hours and feel as good as
they did when you first started using them As with your real car
though, it is recommended to keep them clean by performing
some simple, semi-regular maintenance
Regular maintenance (weekly)
Clean the base and each pedal with a damp, lint-free cloth,
ensuring that there is no excess water present in the cloth
Every 200 hours
Remove any excess built-up grease (especially on the brake
pedal) using a clean cloth or piece of kitchen towel
Reapply new grease (sparingly) to ensure continued smooth
operation of the pedals
If you run out of the supplied grease then you may source
a replacement of your own However, you must only use
a silicone-based grease/lubricant in order to prevent any issues
Petroleum-based lubricants or Gasoline and Hydrocarbon
solvents must NOT be used as they will degrade the components
used in the pedals
QUESTIONS?
logitechG com/support/pro-pedals
14 ENGLISH