GE DCVH680EJWW Installation Instructions Manual page 6

MOBILE OR MANUFACTURED HOME
8
INSTALLATION
GARAGE INSTALLATION (IF ALLOWED
9
BY LOCAL CODES)
10 DRYER EXHAUST TO RIGHT, LEFT OR
BOTTOM CABINET
WARNING -
THIS EXHAUST INSTALLATION, BE SURE
TO DISCONNECT THE DRYER FROM ITS
ELECTRICAL SUPPLY. PROTECT YOUR
HANDS AND ARMS FROM SHARP EDGES
WHEN WORKING INSIDE THE CABINET.
BE SURE TO WEAR GLOVES.
REMOVE
SCREW
AND SAVE.
Detach and remove the bottom, right or left side knockout
as desired. Remove the screw inside the dryer exhaust duct
and save. Pull the duct out of the dryer.
B
Cut the duct as shown and keep portion A.
Installation Instructions
BEFORE PERFORMING
REMOVE DESIRED
KNOCKOUT (ONE ONLY).
FIXING HOLE
A
11 1/4"
TAB LOCATION
BEND TAB
o
UP 45
Through the rear opening, locate the tab in the middle of
the appliance base. Lift the tab to about 45º using a flat
blade screwdriver.
ADDING NEW DUCT
FIXING
HOLE
PORTION "A"
RIGHT OR
LEFT SIDE
EXHAUST
ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT SIDE OF CABINET
CAUTION:
Be sure not to pull or damage the
electrical wires inside the dryer when inserting the duct.
EXHAUST CAN
BE ADDED TO
LEFT OR RIGHT SIDE
DUCT
TAPE