Purivortex Vortex V3 User Manual page 9

How to Replace the Filter
1. Unplug the air purifier. (Figure 1)
2. Take away the grilles from the purifier and pull the tabs to
remove the old filter.
Take away the grilles from the purifier and pull the tabs to
remove the old filter. (Figure 2)
3. Remove the new filter from its plastic packaging and install
a new filter with the white side facing out (tabs will be visible).
4. Press and hold time button and Power ON/OFF button for
3 seconds to reset the replace filter indicator.
5. Reattach the grilles to the purifier and plug the power cord
into a standard AC outlet.
When the filter indicator light
turns red, it needs to replace
the filter.
(Figure 3)
08
(Figure 1) (Figure 2)
Wash Pre-Filter Fabric
1. Take away the grilles to take the pre-filter fabric away.
2. Wash the pre-filter fabric with cold water and dry in
the air.
3. Reattach pre-filter fabric to the grilles. The position
of the mesh maintenance label needs to be kept in
the middle above the front cover.
4. Reattach the grilles to the purifier.
(Figure 1)
(Figure 2)