Samsung S23A750D Service Manual page 37

4-6-2. Maintenance of functional specifications
■ Checking the version code
1. In SVC Model checking MCU Code revision and inspection.
2. In SVC Model
Adjust the brightness and contrast values for 0。
-
Press enter five (5) Seconds
-
SVC Function OSD On the show.
-
If you want to exit SVC Function, turn off the power.
-
3. Safe mode
When the input signal when supported by higher frequency signals than the product,
-
safe mode gives the user some time (1 Minutes) change the graphics mode are set to the
recommended setting.
SVC Function OSD Included 103(Width)X 82(Height) grid, Board information, and display the
software version and Micom Inspection and.
Board information
Select the automatic option
Pixel switching option is selected
Country
Select hot plug
Scaler supplier
Micom Version
Micom Inspection and
4 故障排除
4-19