Summary of Contents for Samsung SyncMaster S23A950D
Page 1
User Manual SyncMaster S23A950D / S27A950D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00035A-09 Great user manuals database on UserManuals.info...
Page 2
2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Page 3
Before Using the Product Icons used in this manual The following images are for reference only. Real-life situations may differ from what is shown in the images. Symbols for safety precautions A serious or fatal injury may result if instructions are not followed. Warning Personal injury or damage to properties may result if instructions are Caution...
Page 4
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Be sure to contact Samsung Customer Service Center (page 81) if the inside of the monitor needs cleaning. (service fee will be charged).
Page 6
Before Using the Product Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands.
The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed.
Page 8
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire.
SAMSUNG time) may seriously affect its performance. Be sure to consult Samsung Customer Service Center (page 81) before installation if you want to install the product at such a place. Operation Warning High voltage runs through the product.
Page 10
(paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 81).
Page 11
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
Page 12
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen.
Table Of Contents BEFORE USING THE Copyright PRODUCT Icons used in this manual Symbols for safety precautions Cleaning Cleaning Securing the Installation Space Precautions for storage Safety Precautions Electricity and Safety Installation Operation Correct posture to use the product PREPARATIONS Checking the Contents Removing the Packaging Checking the Components...
Page 15
Changing the Resolution Using a PC Connecting to a Video Device Connection Using the HDMI Cable Connecting Headphones SCREEN SETUP MAGIC SAMSUNG MAGIC Angle SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Color Brightness Configuring Brightness Contrast Configuring Contrast Sharpness Configuring Sharpness Response Time...
Page 16
Table Of Contents Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma RESIZING OR Image Size RELOCATING THE Changing the Image Size SCREEN H-Position Configuring H-Position V-Position Configuring V-Position Menu H-Position Configuring Menu H-Position Menu V-Position Configuring Menu V-Position SETUP AND RESET Eco Motion Sensor...
Page 17
OTHERS Displaying INFORMATION Configuring Brightness in the Startup Screen Configuring Volume in the Startup Screen TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A SPECIFICATIONS General...
Page 18
Table Of Contents APPENDIX Contact SAMSUNG WORLD WIDE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Terminology INDEX Table Of Contents Great user manuals database on UserManuals.info...
Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the Styrofoam from the product. Check the components and remove the Styrofoam and plastic bag. The appearance of actual components may differ from the image shown.
Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick Setup Guide Warranty User Manual (Not available in some locations) Cleaning cloth Power cable...
Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. If the MENU button is not visible, lightly tap the area around the [ ] button.
Page 22
Preparations Icons Description Open or close the onscreen display (OSD) menu, or return to the last menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. To lock the OSD control, press the MENU button [ ] for five seconds.
Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DISPLAYPORT IN DVI IN HDMI IN DC 14V Port Description Connects to a source device using an DP cable. Connects to a source device via a DVI cable.
Preparations 1.2.3 Tidying Up the Connected Cables Tidy up the cables using the cable holder on the back of the stand. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 1.2.4 Kensington Lock An anti-theft lock allows you to use the product securely even in public places.
Preparations 1.2.5 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully. 1 Preparations Great user manuals database on UserManuals.info...
This feature allows you to view 3D content such as 3D movies. You can view 3D content using(SyncMaster-dedicated) Samsung 3D glasses. You can purchase "SyncMaster-dedicated 3D glasses (model name: SSG-M3750CR)" separately. Contact the dealer you purchased the product from for details about purchasing the 3D glasses.
Configuring the 3D Mode Press [ ] on the product. Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to 3D Mode and press [ ] on the product.
Page 28
Press [ ] to move to Depth and press [ ] on the product. The following screen will appear. Modo 3D : 3D→2D Volver : Imagen I/D Cambio I/D 3D→2D Volver Adjust Intro Adjust the Depth using the [ ] button. The selected option will be applied.
Configuring the 3D → Press [ ] on the product. Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to and press [ ] on the product.
For further details about "TriDef 3D Games for SyncMaster(TriDef 3D)": please contact DDD Co., Ltd. www.tridef.com For further details about the product, please contact Samsung Electronics. To find 3D-compatible games, visit www.tridef.com/syncmaster. "SyncMaster 3D Game Launcher(TriDef 3D)" is updated each time new games are added to the list of compatible games.
Precautions when Viewing 3D Video The 3D effect may be experienced differently depending on the viewer. You may not notice the 3D effect at all if you have a prescription for one eye that is very different from the other eye. When viewing a 3D video under a fluorescent lamp or 3-wavelength lamp, you may notice a small amount of screen flickering.
Connecting and Using a Source Device Before Connecting 3.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.
Connecting and Using a Source Device Connecting and Using a PC 3.3.1 Connecting to a PC Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. Select a connection method suitable for your PC. Connecting parts may differ in different products.
Page 34
Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN Connect the HDMI-DVI cable to the HDMI port on the back of the product and the DVI port on the Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC.
An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive.
Connecting and Using a Source Device 3.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: 1920 x 1080 60Hz Follow the above settings to get the resolution.
Connecting and Using a Source Device 3.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
Page 38
Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel → Display → Screen Resolution and change the resolution. 3 Connecting and Using a Source Device Great user manuals database on UserManuals.info...
Connecting and Using a Source Device Connecting to a Video Device Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. The product can be connected to a video device. Connecting parts may differ in different products.
Configure the screen settings such as brightness and color tone. MAGIC This feature provides the viewing angle, brightness, and tint to suit your preferences. 4.1.1 SAMSUNG MAGIC Angle Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle.
Press [ ] to move to the option you want and press the [ The selected option will be applied. 4.1.2 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used.
] to move to the option you want and press the [ The selected option will be applied. 4.1.3 Configuring SAMSUNG MAGIC Color Color is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. This menu is not available when Angle is enabled.
Screen Setup Off: Disable Color. Demo: Compare normal screen mode with Color mode. Full: Obtain a vivid picture quality for all areas including the flesh colors in the picture. Intelligent: Improve the chroma for all areas except the flesh colors in the picture. Press [ ] to move to the option you want and press the [ The selected option will be applied.
Screen Setup This menu is not available when Bright is in Cinema Dynamic Contrast mode. 4.3.1 Configuring Contrast Press [ ] on the product. Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to Contrast and press [...
Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time Normal Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product.
Page 46
Screen Setup Press [ ] to move to HDMI Black Level and press [ ] on the product. The following screen will appear. PICTURE MAGIC Brightness Contrast Sharpness Response Time Nomal HDMI Black Level Return Move Enter Normal: Select this mode when there is no contrast ratio degradation. Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.
Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in...
Configuring Tint Press [ ] to move to Green and press [ ] on the product. The following screen will appear. COLOR Green Blue Normal Color Tone Mode1 Gamma Return Adjust Enter Adjust the Green using the [ ] button. Blue Adjust the value of the color blue in the picture.
Configuring Tint This menu is not available when Angle is enabled. This menu is not available when Color is in Full Intelligent mode. 5.4.1 Configuring the Color Tone Settings Press [ ] on the product. Press [ ] to move to COLOR and press [ ] on the product.
Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. This menu is not available when Angle is enabled. 5.5.1 Configuring Gamma Press [ ] on the product. Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma...
Resizing or Relocating the Screen Image Size Change the picture size. 6.1.1 Changing the Image Size Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Image Size and press [ ] on the product.
Resizing or Relocating the Screen H-Position Move the screen to the left or right. Available only when Size is set to Screen Fit. 6.2.1 Configuring H-Position Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product.
Resizing or Relocating the Screen Press [ ] to move to V-Position and press [ ] on the product. The following screen will appear. SIZE&POSITION Image Size Wide H-Position V-Position Menu H-Position Menu V-Position Return Adjust Enter Adjust the V-Position using the [ ] button.
Resizing or Relocating the Screen 6.5.1 Configuring Menu V-Position Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Menu V-Position and press [ ] on the product.
Setup and Reset Adjust the power consumption of the product to save energy. 7.1.1 Eco Motion Sensor Eco Motion Sensor activates to save power when it does not detect any movement within a specified area for a specified period of time. Configuring the Eco Motion Sensor Press [ ] on the product.
Setup and Reset Configuring Backlight Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Backlight and press [...
Page 57
Setup and Reset Press [ ] to move to Eco Light Sensor and press [ ] on the product. The following screen will appear. Eco Motion Sensor 5 Min Backlight Eco Light Sensor Sensitivity Brightness Level Eco Saving Eco Icon Display Return Move Enter...
Setup and Reset Press [ ] to move to and press [ ] on the product. Press [ ] to move to Brightness Level and press [ ] on the product. The following screen will appear. Eco Motion Sensor 5 Min Backlight Dimming Eco Light Sensor...
Setup and Reset The selected option will be applied. This menu is not available when Bright is in Dynamic Contrast mode. This menu is not available when Eco Light Sensor is enabled. 7.1.4 Eco Icon Display Configuring the Eco Icon Display Settings Press [ ] on the product.
Page 60
Setup and Reset When the screen becomes brighter as the ambient light becomes brighter and the Eco Light Sensor activates, the brightness slide bar level will increase with a sun image displayed above the bar. When the screen becomes darker, the brightness slide bar level will decrease with a moon image displayed above the bar.
Setup and Reset The progress of a tree growing will be represented as 10 different images (stages). After one full-grown tree is complete, the initial image will be restored and the number of trees will continue to accumulate. The number for energy trees will be rounded to one decimal place. Menu Transparency Set the transparency for the menu windows: 7.2.1 Changing Menu Transparency...
Setup and Reset Press [ ] to move to Language and press [ ] on the product. The following screen will appear. SETUP&RESET Menu Transparency Language PC/AV Mode Auto Source Display Time Key Repeat Time Return Move Enter Press [ ] to move to the option you want and press the [ The selected option will be applied.
Setup and Reset Auto Source Activate Auto Source. 7.5.1 Configuring Auto Source Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Auto Source and press [ ] on the product.
Setup and Reset Press [ ] to move to Display Time and press [ ] on the product. The following screen will appear. SETUP&RESET Menu Transparency English Language PC/AV Mode Auto Source 5 sec Display Time 10 sec 20 sec Key Repeat Time 200 sec Return...
Setup and Reset Customized Key By configuring Customized Key to suit your preferences, you can change the screen settings more conveniently. 7.8.1 Configuring Customized Key Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product.
Setup and Reset Press [ ] to move to Off Timer On/Off and press [ ] on the product. The following screen will appear. SETUP&RESET Customized Key Off Timer On/Off Off Timer Setting Reset Return Move Enter Off: Deactivate the off timer so that the product does not power off automatically. On: Activate the off timer so that the product powers off automatically.
Setup and Reset 7.11 Reset Return all the settings for the product to the default factory settings. 7.11.1 Initializing Settings (Reset) Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Reset...
INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 8.1.1 Displaying INFORMATION Press [ ] on the product. Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR Digital SIZE&POSITION 67.5kHz 60Hz PP...
Page 69
INFORMATION Menu and Others Press [ ] in the startup screen. The following screen will appear. Volume Exit Adjust Enter Adjust the Volume using the [ ] button. 8 INFORMATION Menu and Others Great user manuals database on UserManuals.info...
Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
Page 71
Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 78).
Page 72
Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting.
Page 73
Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Select Control Panel Appearance and → Themes Display Settings Advanced Monitor, → → → → and adjust Refresh rate under Monitor settings. Windows ME/2000: Select Control Pane l Display →...
Page 74
Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and → resolution? Themes Display Settings and adjust the resolution. → → Windows ME/2000: Go to Control Panel Display → Settings and adjust the resolution. →...
Specifications 10.1 General Model Name S23A950D S27A950D LCD Panel Size 23 inches (58cm) 27 inches (68cm) Display area 511.8 mm (H) x 288.3 mm (V) 599.6 mm(H) x 337.7 mm (V) 20.1 inches (H) x 11.4 inches (V) 23.6 inches (H) x 13.3 inches (V) Synchroni Horizontal 30~140khz...
Page 76
Hereby, Samsung Electronics, declares that this [Monitor] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
Specifications 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse.
Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality.
Page 80
Specifications Horizontal Vertical Pixel Sync Resolution Frequency(kH Frequency(Hz) Clock(MHz) Polarity(H/V) 1920 x 1080 56.250 50.000 148.500 + / + 50 Hz, 1080p 1920 x 1080 67.500 60.000 147.500 + / + 60 Hz, 1080p Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.
Page 81
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
Page 82
(French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line Appendix Great user manuals database on...
Page 87
Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Page 88
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
Page 89
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
Page 90
Connecting Headphones Removing the Packaging Connecting to a PC Response Time Connecting to a Video Device Reverse Side Contact SAMSUNG WORLD WIDE Copyright Correct posture to use the product Safety Precautions Customized Key Securing the Installation Space Setting Optimum Resolution...