Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jegs Buggy Stinger 555-44100
Summary of Contents for Jegs Buggy Stinger 555-44100
- Page 1 Buggy Assembly Guide 555-44100 - Stinger Assembly Instruction & Parts List...
- Page 2 Precautions Precautions With Small Children Beginning a Run • For children under the age of 13, parental guidance 1. Place the Stinger so that the wheels are off the ground. is recommended when running. 2. Confirm that the speed controller switch is OFF, and connect the motor and battery.
- Page 3 Instructions Equipment We would like to thank you for purchasing the JEGS Stinger Included Items Buggy. Please read the following instructions for best results. • (1) JEGS Electric Radio-Controlled Buggy This manual contains many useful operating tips. Please hold • (1) Transmitter [3-Channel] on to this manual for future references.
-
Page 4: Component Breakdown
Component Breakdown Front Bumper Front Up Rod Front Shock Tower Front Arm Shock Front Body Mount [Oil Damper] Steering Rod Front Chassis Mount Velcro Strap Steering Servo Main Chassis Battery Compartment Receiver Box ESC (Electronic Speed Control) Rear Body Mount Rear Shock Tower Dog Bone Rear Arm... -
Page 5: Electronic System
Electronic System Motor Steering Servo ESC (Electronic Speed Control) Channel 1 Channel 2 Receiver Battery 2.4G Radio Control System D/R Steering Wheel FUNC CH3 ST L/- TH Fwd/+ ST R/+ TH Rev/- Power Switch Trigger Antenna Wire Bind Button B) Battery 3) Channel/Auxiliary 2) Channel/Throttle 1) Channel/Steering... -
Page 6: Install Batteries
Receiver Binding Install Batteries 1. Remove the battery cover from the transmitter 1. Press and hold the “binding button” on the receiver 2. Install 4 AA alkaline dry cell batteries 2. While holding the binding button, turn the vehicle 3. Insert the 4 AA batteries according to the polarity power switch to On 4. -
Page 7: Basic Operation
Basic Operation Left Right Switch Switch Brake Push trigger Forward twice for reverse. For more transmitter details, please refer to the JEGS 30 user manual. - Page 8 Slipper Clutch System The base factory setting is a starting point to allow enough slippage to protect your drivetrain from heavy throttle loads. Do not set the slipper clutch too tight as this may damage the transmission. If set too loose, the Stinger will have a lack of performance which may result in damaging the slipper clutch system.
- Page 9 Front End Exploded View...
- Page 10 Main Chassis & Rear End Exploded View...
- Page 11 Differential Gearbox Exploded View Exploded View...
-
Page 12: Warranty
The date of purchase must be verified by the resulting from crashes. date on the sales receipt. JEGS is not liable for any loss or damages resulting from This warranty covers defects in material and workmanship the use or misuse of this product or any of the accessories only.