Related Manuals for Jegs Holeshot 555-44200
Summary of Contents for Jegs Holeshot 555-44200
- Page 1 Stadium Truck Assembly Guide 555-44200 - Holeshot Assembly Instruction & Parts List...
- Page 2 Precautions Precautions With Small Children Beginning a Run • For children under the age of 13, parental guidance 1. Place the Holeshot with the wheels off the ground. is recommended when running. 2. Confirm that the speed controller switch is OFF, and connect the motor and battery.
- Page 3 Instructions Equipment We would like to thank you for purchasing the JEGS Holeshot Included Items Stadium Truck. Please read the following instructions for • (1) JEGS Electric Radio-Controlled Stadium Truck best results. This manual contains many useful operating tips. • (1) Transmitter [3-Channel] Please hold on to this manual for future references.
-
Page 4: Component Breakdown
Component Breakdown Front Up Rod Front Bumper Front Arm Front Shock Tower Shock Front Body Mount [Oil Damper] Steering Rod Front Chassis Mount Velcro Strap Steering Servo Main Chassis Battery Compartment Receiver Box ESC (Electronic Speed Control) Rear Body Mount Rear Shock Tower Dog Bone Rear Arm... -
Page 5: Electronic System
Electronic System Motor Motor Steering Servo Steering Servo ESC (Electronic Speed Control) ESC (Electronic Speed Control) Channel 1 Channel 1 Channel 2 Channel 2 Receiver Receiver Battery Battery 2.4G Radio Control System D/R Steering Wheel FUNC CH3 ST L/- TH Fwd/+ ST R/+ TH Rev/- Power Switch... -
Page 6: Install Batteries
Receiver Binding Install Batteries 1. Remove the battery cover from the transmitter 1. Press and hold the “binding button” on the receiver 2. Install 4 AA alkaline dry cell batteries 2. While holding the binding button, turn the vehicle 3. Insert the 4 AA batteries according to the polarity power switch to On 4. -
Page 7: Basic Operation
Basic Operation Left Right Switch Switch Brake Push trigger Forward twice for reverse. For more transmitter details, please refer to the JEGS 30 user manual. - Page 8 Slipper Clutch System The base factory setting is a starting point to allow enough slippage to protect your drivetrain from heavy throttle loads. Do not set the slipper clutch too tight as this may damage the transmission. If set too loose, the Holeshot will have a lack of performance which may result in damaging the slipper clutch system.
- Page 9 Front End Exploded View...
- Page 10 Main Chassis & Rear End Exploded View...
- Page 11 Differential Gearbox Exploded View Exploded View...
-
Page 12: Warranty
JEGS is not liable for any loss or damages resulting from This warranty covers defects in material and workmanship the use or misuse of this product or any of the accessories only.