Installation And Deinstallation - CYBEX SENSORSAFE CLOUD Z LINE User Manual

Approved for:
Cybex Cloud Z Line
EN
Cybex Aton M i-Size
Cybex Aton B Line
Dear customer, thank you for purchasing a SENSORSAFE clip. This product is manufactured
under special quality surveillance and complies with the strictest safety requirements.
IMPORTANT INFORMATION
•
The following short instruction is intended to provide only an overview. To achieve
maximum security and comfort for your child it is imperative that you read the entire user
guide of the car seat carefully.
•
SENSORSAFE cannot be used with seats other than the ones listed. Application on other
products can lead to serious danger for your child.
•
It is essential to use and install SENSORSAFE per the instructions provided in this
manual. In particular, pay attention to the correct positioning of the clip!
•
SENSORSAFE is a monitoring system attached to the car seat and connected to your
smartphone via Bluetooth (Bluetooth class 2). It will alert you of unsafe situations for the
child. The system consists of the following two components:
1. Smart Chest Clip: e.g. measurement of ambient temperature, state of an open or closed
clip.
2. Smartphone: SENSORSAFE only works with the SENSORSAFE application, which is
available in the Apple App Store or Google Play Store (1).
•
Even when used properly and in accordance with its intended purpose SENSORSAFE
6
serves only as a supplementary safety support system. The functionality depends on
several factors and cannot be guaranteed. The ultimate responsibility for the safety of a
child resides with the child's parents or caregivers. SENSORSAFE does not represent
any event to circumvent, mitigate nor represent a substitution for parental legal duties.
•
WARNING! Full function of SENSORSAFE is based on communication to the smartphone.
Please take it with you every time and activate all functions of the smartphone needed
for SENSORSAFE.
•
WARNING! Never leave your child unattended in the car.
•
Keep plastic packaging material out of your child's reach: danger of suffocation!
•
Used electronic devices do not belong in household garbage.
��
Please always have the instruction manual at hand close to the car seat.

INSTALLATION AND DEINSTALLATION

The SENSORSAFE clip needs to be attached to the harness system of the seat. Both parts of
the clip have slots for connecting it to the harness system.
For installation of both parts please proceed as follows:
• Grasp the harness under the shoulder pads and guide it from back to front through the
upper slot of the clip (2).
• Guide the harness behind the clip and insert it from back to front in the lower slot.
Make sure the harness straightly runs through both slots and is not twisted (3). To uninstall
��
the clip, push the harness together and guide it out of the slots.