Restraining The Child With Harness And Clip - CYBEX SENSORSAFE CLOUD Z LINE User Manual

RESTRAINING THE CHILD WITH HARNESS AND CLIP

Adjust the seat according to the instructions in the user guide of the seat. Restrain your child
as described in the user guide of the seat (see chapter: "STRAPPING WITH HARNESS
SYSTEM"). After closing the belt buckle please proceed with the following additional steps:
• Close the clip with an audible CLICK (4).
• Push the closed clip down first – towards the buckle.
• Pull cautiously on central adjustment belt in order to tighten shoulder belts until they fit
your child's body (5).
• Position the clip directly beneath the shoulder pads (6).
Please make sure the harness system is tightened and not twisted. To open the clip please
��
press the button in the middle and pull both parts apart (7).
SENSORSAFE APP
Download and setup
The SENSORSAFE App can be downloaded in the Apple App Store or Google Play Store for
free. To use the SENSORSAFE clip connected to the SENSORSAFE App please ensure that:
• the app is installed on your smartphone.
• Bluetooth is turned on.
• the clip is buckled and your smartphone is connected to it.
• the SENSORSAFE App is given permission to send notifications and volume is turned on
(Do Not Disturb is disabled).
Before first use
Before using SENSORSAFE for the first time, the clip must be registered to your smartphone
account. In the future the system will awake automatically, when the clip is closed and
Bluetooth is activated on your smartphone as long as the app is running in the background
and not closed on your phone.
For connecting, proceed as follows:
1. Pull the battery pull tag from the SENSORSAFE chest clip and discard it (8).
2. Activate Bluetooth on your smartphone, open the SENSORSAFE application and follow
the instructions for registration. Close the clip. An LED will light up when the clip starts to
send information and will turn blue when successfully connected to the application. Now
you can see the SensorSafe clip in the list of devices on the SensorSafe mobile app.
3. Test out the SensorSafe system alerts prior to using it with a child to familiarize yourself
with how the safety notifications are triggered.
Registering several clips with one smartphone
You can register multiple clips to one smartphone and account and be connected to them
simultaneously. To do so, connect your smartphone with each clip one after another by
clicking "add new device" and following the instructions.Leave all other clips in the area
unbuckled when registering a new clip for the first time.
Registering several smartphones with one clip
One clip can be registered with more than one smartphone but only one smartphone can
actively be connected at a time. Please perform the registration steps for one smartphone at
a time. To switch between connected users, the connected user must select "Disconnect" in
Settings to allow someone else to connect.
EN
7