Subscribe to Our Youtube Channel
Related Manuals for Worx WX876.X Series
Summary of Contents for Worx WX876.X Series
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 20V Portable Electric Cooler WX876 WX876.X...
-
Page 2: Table Of Contents
TABLE OF CONTENTS responsible for their safety. 2. Children aged from 8 years 1. SAFETY INSTRUCTIONS and above are allowed to 2. COMPONENT LIST use the appliances. This 3. TECHINCAL DATA appliance can be used by 4. INTENDED USE children aged from 8 years 5. - Page 3 used with the power supply environments; – catering and similar non- unit provided with the appliance. retail applications. 5. If the supply cord is 5. WARNING: When damaged, it must positioning the appliance, be replaced by the ensure the supply cord is manufacturer, its service not trapped or damaged.
- Page 4 appliance is left empty for circuited by conductive materials. When battery long periods, switch off, defrost, clean, dry, and pack is not in use, keep leave the door open to it away from other metal prevent mould developing within the appliance. coins, keys, nails, screws or 9.
- Page 5 procedure. SYMBOLS i) Do not maintain battery pack on charge when not read instruction manual in use. j) After extended periods Read operator’s manual of storage, it may be necessary to charge and discharge the battery pack Warning several times to obtain maximum performance.
- Page 6 12 13 F H M L 20.5 20.5...
- Page 7 F H M L 20.5 20.5 F H M L 20.5 20.5...
- Page 8 F H M L 20.5 20.5 F H M L 20.5 20.5 MAX/ECO F H M L 20.5 20.5...
- Page 9 F H M L 20.5 20.5 F H M L 20.5 20.5 F H M L 20.5 20.5...
-
Page 10: Component List
DC Rated voltage charged randomly. AC:1.2 A-0.5 A You can also charge the batteries with a Rated Current See Fig. Worx PowerShare Charger . A1,A2 Note: Temperature Range -20 ~ 20 1. The batteries will be charged more Power Supply... - Page 11 -AC Power Mode Setting the Temperature Turn on: Plug the AC cord into the cooler Note: Batteries must be installed or and to a power supply, then the cooler is cooler connected to power source to ready to work. change settings Turn off: for 3 seconds until “OFF”...
-
Page 12: Cleaning
wipe the excess water from the cooler; INPUT DC 12V DC 24V 3. Put the cooler in a dry place and keep the lid sightly open to avoid odors. CUT IN CUT IN 4. Recommended storage environment:ambient temperature: 25°C, ambient humidity:75%. 8.5V 10.9V 21.3V... -
Page 13: Toubleshooting
9. TOUBLESHOOTING Problem Reasons/Suggestions Cooler does not work 2. Check if connected to a power source or batteries are installed; 3. Check if the fuse is burnt; 4. Ensure power supply is functioning correctly; cause start delay of the compressor. The temperature is set too low Cooler storage box is abnormally warm 1. - Page 14 Code FA shown Possible reasons: Compressor module failure Remove the batteries out and plug the batteries again to see if it works. If code still shows, contact manu- facturer for help. Code Fb shown Possible reasons: Compressor module failure Remove the batteries out and plug the batteries again to see if it works.
- Page 15 10. DECLARATION OF CONFORMITY Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany On behalf of Positec declare that the product, Description 20V Portable Electric Cooler Type WX876 WX876.X (8 - designation of machin- ery, representative of Car Refrigerator) Function Intended to be used for the preservation of food, one of whose compartments is suitable for the storage of fresh food...
-
Page 16: Declaration Of Conformity
18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P. R. China After-sales Service and Application At www.worx.com you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: 0345 202 9679 E-Mail: customerservices@worxtools.com...
Need help?
Do you have a question about the WX876.X Series and is the answer not in the manual?
Questions and answers