Pyle PTEDK50 User Manual page 4

ASSEMBLY
1. Loosen frame bracket bolts with supplied drum key, and open the drum stand
as shown below. Tighten bolts to secure once the stand is set into the position
pictured. (Do not over tighten)
2. Loosen pad bracket bolts and insert pads and module as shown below, tighten
bolts to secure. (Do not over tighten) Remove cymbal top nut and lower cymbal
onto holder, re-install nut to secure cymbal.
HI- HAT
4
www.PyleUSA.com
CRASH
TOM1 TOM2
RIDE
TOM3
PTEDK50
SNARE