Table of Contents
Advertisement
CONNECT WITH EXTERNAL AUDIO SOURCE EQUIPMENT
This equipment can send its various information via channel10, including:
trigger notes, force, hi-halpedal performance and status, etc.
Note: The song replaying and metronome information can not be sent.
Use the external audio sequencer to record the performance
1. Connect external audio sequencer or PC via MIDI OUT or USB.
2. Set the equipment of channel 10 in the audio sequencer or in the sequence
software, and than start recording.
3. Play the pads.
4. Stop the performance and recording, and listen to the performance.
TROUBLESHOOTING
PROBLEM
No sound
Pad has no sound
Metronome has no sound
DEMO SONG has no sound
AUDIO SOURCE SPECIFICATION
•
Max polyphony: 32
•
Drum kits: 10 preset drum kits: KIT01-10
•
Voice: 108 voices (DRUMS, PERCUSSION, SFX)
•
Audio sequencer: DEMO SONG 10
•
Recording: realtime recording, but can not be saved.
•
Tempo: 30bpm-280bpm
•
Display: three LED (red or green)
•
Connection: Phone stereo out connector (l/8"), AUX IN stereo connector (1/8"),
Audio output connector (1/4" Llmono),
•
MIDI OUT
•
Power supply: DC 12V internal + external
**The speci cation is subject to change without prior notice.**
16
www.PyleUSA.com
Please con rm the volume knob is not turned o
1. Con rm the pad connection is correct.
2. Con rm the pad volume is not set to 0
Con rm the metronome volume is not set to 0
Con rm the metronome volume is not set to 0
REASON
Advertisement
Table of Contents
