Pyle PTEDK50 User Manual page 2

Thank you for purchasing this digital drum set. The drum set has been
developed to act and play like a drum set but with greater ease.
Before you use the instrument, we recommend you to read through
this manual.
Location
•
To avoid deformation, discoloration,
or more serious damage, do not expose
the unit to direct sunlight, high
temperature sources, or excessive
humidity.
•
Direct sunlight.
•
High temperature (near a heat source,
or in car during the day time).
•
Disconnect all cables before moving
Power Supply
•
Use the speci ed adapter only. Using
the wrong adapter can result in damage
to the instrument or overheating.
•
Turn the power switch OFF when the
instrument is not in use.
•
Remove the electric plug from the
outlet when the instrument is not to
be used for extended periods of time,
or during electrical storms.
•
Avoid plugging the AC adaptor into
an AC outlet that is also powering
high-consumption appliances such as
electric heaters or televisions.
Also avoid usingmulti plug adaptors
since these can reduce sound quality,
cause operation errors and result in
possible damage.
2
www.PyleUSA.com
CONGRATULATIONS!
Turn Power OFF When Making
Connections
•
To avoid damage, turn OFF the power
switch and all related devices prior to
connecting or disconnecting cables.
Handling and Transport
•
Never apply excessive force to controls,
connectors, and other part
•
Unplug cables by gripping the plug
•
Disconnect all cables before moving
the instrument.
•
Physical shocks caused by dropping,
bumping, or placing heavy objects on
the instrument can result in scratches
and more serious damage.
Cleaning
•
Clean the module with a dry, soft cloth.
•
A slightly damp cloth may be used to
remove stubborn grime and dirt.
•
Never use cleaners such as alcohol or
thinner.
•
To avoid discoloration, do not place
vinyl objects on top of the instrument.
Electrical Interference
•
This instrument contains digital
circuitry and may cause interference
if placed too close to radio or television
receivers. If this occurs, move the
instrument further away from the
a ected equipment.
rmly. Do not pull on the cable.