Safety tips-please read them carefully before using How to guide Maintenance Storage: please place the product in a cool place, do not place in dangerous environment, extrusion, pressure, high temperature, low temperature, high humidity, easy to fall, hard hit, etc. . Do not remove the watchcase by yourself how to use Before use: Please make sure the power supply is sufficient...
Full display and identification, Key functions A key D key LIGHT +/START/STOP B key C key MODE/SET -/RESET Solar charging function LCD synchronize with hands time Fully automatic calendar (2000~2099) week, month, day 12/24hour system Alarm function World time function (48 cities) Countdown timer function 1/100 stopwatch function (Range: 99 hours 59 minutes 59.99 seconds) Compass function...
2.1General operation: Click B to switch mode, as shown below: B key B key B key 1.5s 1.5S 1.5S 1.5S Normal Time Date Stopwatch Countdown 1.5S See next page - 3 -...
Page 4
Countdown B key World Time B key B key B key D key 1.5S 1.5s Display for Alarm Clock Compass 1.5s in turn World Time In any mode, press the A key to illuminate EL for 3 seconds (When battery power is low, pressing A key and low battery power icon L level will flash for 5 seconds) - 4 -...
2.2Normal Time and Date Settings In normal time mode, hold down the B key for 3 seconds to enter the time and date setting mode, press the B key to move the setting item, the order is as follow: Normal time Hold B key for 3s Time zone Hour...
Press D or C key to select time zone. Press D or C key to turn on or off the DST. Press D or C key to select 12 or 24hour system. Press D key to increase the value, hold down D key to increase the value quickly.
Page 7
Split time: When stopwatch is running, press C key to enter split time, press D key to stop and display total time, then press C key to clear “0”. Two players’ completion time: When stopwatch is running, press C key to display completion time of player 1, press D key to start measurement of completion time of player 2, then press C key to display completion time of player 2, press C key to clear “0”.
2.4 Countdown Mode Countdown range :99 hours 59 minutes 59 seconds In countdown function mode, click D to start or stop When the countdown stops, hold down the C key and value flash for 3 seconds, then return the set value When the countdown time reaches "0:0000", it will ring for 10 seconds, press any key to stop the alarm and the countdown time will automatically return to the set value...
Page 9
Hold B key B key for 3s B key B key Countdown Time Hour Minute Second Setting Hold B key for 2s Press D key to increase the value, hold down D key to increase the value quickly. Press C key to decrease the value, hold down C key to decrease the value quickly.
2.5Alarm Mode Alarm ON or OFF: Press the C button in alarm mode to select 5 sets of alarm clocks and hourly chime, press the D button to turn ON or OFF the alarm as shown below: D key Alarm 1 ON Alarm 1 OFF C key D key...
Page 11
Alarm setting In alarm 1 to alarm 5 modes, hold down the B key for 3 seconds to enter the setting mode, press the B key to select the setting item, the order shown below: Hold B key for 2s Hold B key for B key...
2.6World Time Mode In world time mode, press the C or D key to view different city time as shown below: D key D key Showing 1.5 Showing 1.5 Showing 1.5 seconds in turn seconds in turn seconds in turn C key C key Look backward...
Setting world time to normal time (local time): In world time mode, hold down the B key for 3s and convert the world time to normal time as follows: Hold B key for 3s World Time Flash for 3s 2.7Compass Mode Direction measurement by pressing Convert to normal time the D key in compass mode...
Page 14
The following table illustrates the meaning of abbreviations in Direction Meaning Direction Meaning Direction Meaning Direction Meaning North East North Northeast northeast northeast East South East Southeast southeast southeast South West South Southwest southwest southwest West North West Northwest northwest northwest If no any key operation in 1 minute, it will exit measurement mode automatically, then press D key to re-measure.
Page 15
Compass Correction Mode (OFF CAL) When the compass is first used, a correction is required as follow: After 1 minute Hold B key Turn 2 D/C key for 2s circles Compass Calibration mode Complete calibration measurement In compass mode, hold B key for 2s to enter (OFF CAL) calibration mode.
Page 16
Digital Correction Mode (DEC) After the above (OFF CAL) correction, if there is still a deviation, you can follow the below method for digital correction 1 minute Hold A B key for 2s Press D or C key Compass Complete calibration to adjust deviation Measurement Digital Correction Mode...
Hands Correction When the hand time is inconsistent with the digital display time, the following method can be used to correct it. In normal time mode, hold down the A key for 3 seconds to enter hands correction at 12:00 state. A key Hold A Hold A...
Page 18
2.8Battery Power Checking In normal time mode, press and hold the C and D keys at the same time to display battery power for 2s. If the power is at level 2 and level 3, all functions can be used. When battery power is at level L, the hands will return to 12:00.
3.Solar battery Description Solar battery is installed to generate electricity by using light energy and can store the generated energy into the built-in battery. Usually the battery does not need to be replaced, but after several years of use, its charging capacity will gradually decrease and it can’t be fully charged.
5.Charging time refer to the following tables 1 2500LUX 5000LUX 10000LUX 50000LUX (charging about 20 cm (about indoor (charging around (charging around Illumination under 13 incandescent window outdoor shade) sunny outdoors) lamps) charging) One day 1.49hours 49minutes 25minutes 7minutes usage power Half battery 42.2hours 23.2hours...
Compass accuracy : ±11 degree Compass accuracy: ±11 degree 9.Disclaimer user responsibility This device is for recreational use only. The NORTH EDGE EVOQUE is not intended for measurements and specifications that are required to meet professional or industrial grade requirements - 21 -...
Table of Contents Safety Tips -----------------------------------------------1 1. Getting Started ------------------------------------------1 1.1 Maintenance--------------------------------------------1 1.2 How to use --------------------------------------------1 2. Full display and identification, Key functions ------------------2 2.1 General operation ---------------------------------------3 2.2 Normal Time and Date Settings ---------------------------5 2.3 Stopwatch Mode ---------------------------------------6 2.4 Countdown Mode --------------------------------------8 2.5 Alarm Mode--------------------------------------------10 2.6 World Time Mode---------------------------------------12...