Advertisement
4. If the VCR starts playback during Auto Tuning, Auto Tuning will
stop halfway.
The VCR should be reset and restarted by the item 2 in order to
execute Auto Tuning.
5. To cancel Auto Tuning Mid-operation, press POWER During Auto
Tuning (The VCR is turned off).
6. When the VCR is moved to the other area or country, TV
broadcasts should be stored again.
2.4.2. CHECKING OF MAIN C.B.A.
When servicing the MAIN C.B.A., take out the MAIN C.B.A. and mechanism from the frame. Turn
the MAIN C.B.A. over as shown in
2.4.3. REMOVAL OF CASSETTE TAPE
When the cassette tape could not be uninstalled from an electrical malfunction, There are 2
ways to remove a cassette tape.
1. Removal by compulsory unloading.
A. Press FF and EJECT button simultaneously for more than 3
seconds and set the Service Mode to 7.
B. Press STOP button in order to unload the mechanism. (Pay
attention to tape slack)
Service Mode Indication:
7 ** ** (STOP)
2. Removal by manual operation by rotating the Loading Motor with
the batteries.
A. Disconnect the AC plug, and remove the Top Panel and the
Fig. S1
.
Fig. S1
7 0L ** (EJECT)
Advertisement
