Installation Diagram - Kermi X-net Installation Instructions Manual

Individual modules and accessories
The following components have to be used for the correct
assembly of an x-net modular plastic manifold (flow and
return stem):
•
x-net input module (2)
•
x-net accessory module (2)
•
x-net flow module (quantity according to number of
heating/cooling circuits)
•
x-net return module (quantity according to number of
heating/cooling circuits)

Installation diagram:

Rücklauf
Vorlauf
6
0 0
0,5 0,5
1,0 1,0
1,5 1,5
2,0 2,0
3,0 3,0
4,0 4,0
5,0 5,0
•
x-net end module (2)
•
x-net euro taper adapter M3/4, with retaining
clip, 1 bag = 2 units (quantity of bags according to
number of heating/cooling circuits)
•
x-net wall mount set (1 set = 2 wall mounts)
Installation information:
The following is additionally required for more than 8 he-
ating/cooling circuits:
•
x-net wall mount module (2)
•
x-net wall mount (1)