darda Speed Racer ALPINE CHALLENGE Quick Start Manual page 4

STEP 3
• Attach 2 loops to the built-in track
joiners on the 4 stacking bridges, as
shown to the right.
• Next, attach 2 flexi-curves using the
built-in track joiners on the stacking
bridges, as shown in Figure 3.
STEP 4
• Attach the open end of the straight
track from Figure 1 using the large
joiner at the open end of Figure 3,
as shown in Figure 4.
STEP 5
• Attach one 14" straight track to the open end
of the built-in track joiner on the large baseplate.
Using a track joiner, connect the start-win
box to the other end of the 14" straight track.
Be sure that the start-win box is positioned as
shown in Figure 5.
• Next, attach one 7" straight track and one
flexi- curve using 2 track joiners, as shown in
Figure 5.
• Attach one end of another 14" straight track
to the flexi- curve using a track joiner. Then
connect the other end of the 14" straight track
to the flexi-curve on the middle large joiner.
Flexi-Curve
Built-In Track Joiner
Second 14" Straight
Track
Track Joiner
Flexi Curve
PAGE 4
FIGURE 3
Loop
Flexi-Curve
Loop
FIGURE 4
Connect the assemblies
here with the large Joiner.
FIGURE 5
First 14"
Straight Track
Track Joiner
Start/Win Box
Track Joiner
7" Straight Track
Track Joiner